Yamaha DSP5D Pm5dv2 / Dsp5d Editor Owner's Manual - Page 18
COMP Compressor, EQ Equalizer
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
A MIX (Send levels from the MIX channels to the MATRIX bus) Here you can view and edit the send levels of the signals sent from each MIX channel to the MATRIX bus. The method of operation and the meaning of the display are the same as for (6) MTRX in the MIX window (➥ p.16). B STEREO (Send levels from the STEREO channels to the MATRIX bus) Here you can view and edit the send levels of the signals sent from the STEREO A/B 1 channels to the MATRIX bus. The method of operation and the meaning of the display are the same as for (6) MTRX in the MIX window (➥ p.16). C Channel number Indicates the number of the MATRIX channel corresponding to this module. You can double-click this number to open the Selected Channel window for this channel. If you hold down your computer keyboard's key ( key) and double-click this, the Locked window will open. D EQ (Equalizer) Switches the EQ on/off. The graph immediately below the button shows the approxi- 2 mate response of the EQ. You can drag the graph to edit the response of the EQ, or hold down the key ( key) of your computer keyboard and click the graph to reset 3 it to a flat response. 4 E COMP (Compressor) Switches the compressor on/off. When the compressor is on, the GR meter immediately below the button shows the amount of gain reduction. 5 F INSERT 6 Switches the INSERT PATCH path between enabled/disabled. 7 G DELAY Switches the delay on/off. You can also edit the delay time by dragging the numeric value located immediately below the button up or down 8 9 H SELECT J Selects the MATRIX channel for which you want to make settings. This is linked with the MATRIX [SEL] keys in the MATRIX section of the PM5D panel. I ON K This switches the MATRIX channel on/off. This is linked with the MATRIX [ON] keys in the MATRIX section of the PM5D panel. J Channel name This is a text box that indicates the channel name. You can also edit the channel name within this text box. K Fader This adjusts the output level of the MATRIX channel. The current fader value is shown in the numeric box immediately below the fader. The level meter at the right of the fader shows the output level of the signal. The numbers and alphabetical letters at the right of the fader indicate the DCA group L and mute groups to which that channel belongs, and show the Recall Safe and Mute Safe status of the channel. (For the significance of the numbers and alphabetical letters, see ➥ p.10). L CUE This button cue-monitors the signal of the MATRIX channel. This is linked with the MATRIX [CUE] keys in the MATRIX section of the PM5D panel. If SOLO is active, this will function as SOLO. 18 PM5DV2/DSP5D Editor Owner's Manual
![](/manual_guide/products/yamaha-dsp5d-pm5dv2-dsp5d-editor-owners-manual-858ca2d/18.png)