Yamaha DSP5D Pm5dv2 / Dsp5d Editor Owner's Manual - Page 77
Oscillator window
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Oscillator window In this window of the editor you can edit and view the DSP5D's oscillator status. Choose [Windows] → [Monitor] → [Oscillator] to access this window. PM5D Editor does not have a corresponding window. 1 2 3 For SINE WAVE 2CH For PINK NOISE For BURST NOISE A OSC ON/OFF (oscillator on/off) This switches the oscillator on/off. B OSC MODE (oscillator mode) Here you can select from the following choices of waveform or noise that the oscillator will produce. SINE WAVE 1CH .......Sine wave x 1 channel SINE WAVE 2CH .......Sine wave x 2 channels PINK NOISE Pink noise BURST NOISE ...........Burst noise (intermittently output pink noise) C PARAMETERS Specify the following items according to your choice in 2. • LEVEL This knob adjusts the output level of the oscillator. The range is -96 dB to 0 dB. The output level is shown by the level meter located beside. • FREQ (frequency) Here you can specify the frequency of the sine wave that is output by the oscillator. Use the knob to specify a frequency in the range of 20 Hz-20 kHz. (The current setting is shown by the numerical box located above the knob.) You can select a preset frequency by clicking one of the 10 kHz / 1 kHz / 100 Hz buttons. HINT If SINE WAVE 2CH is selected, the level and frequency of each channel can be set independently. 77 PM5DV2/DSP5D Editor Owner's Manual