Yamaha DSP5D Pm5dv2 / Dsp5d Editor Owner's Manual - Page 35
MIX to MATRIX, ON MATRIX send on/off, POINT Send point, CH to MIX POST POINT
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
❏ MIX to MATRIX 2 1 3 4 5 A MATRIX send level This adjusts the send level of the signal sent from the MIX channel to the MATRIX buses. B Pair This indicates the pairing status of adjacent odd-numbered/even-numbered MATRIX channels. You can click the heart symbol to enable/disable pairing. C ON (MATRIX send on/off) This is an on/off switch for the signal sent from the MIX channel to the MATRIX bus. D POINT (Send point) Selects the point from which the signal is sent from the MIX channel to the MATRIX bus. You can choose PRE FADER (immediately before the fader), POST FADER (immediately after the fader), or POST ON (immediately after the MIX [ON] key). E CH to MIX POST POINT Here you can select either POST ON or POST TO ST as the Post position that will be sent from all input channels to the currently selected MIX bus. 35 PM5DV2/DSP5D Editor Owner's Manual