Yamaha DSP5D Pm5dv2 / Dsp5d Editor Owner's Manual - Page 14
Channel number, MIX SEND, SELECT, CH ON Channel on button, Channel name, Fader
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
7 G Channel number This is the number of the FX RTN channel for this module. You can double-click this number to open the Selected Channel window for this channel. If you hold down your computer keyboard's key ( key) and double-click this, the Locked window will open. H MIX SEND The send levels of the signals sent from the FX RTN channel to the VARI-type MIX buses are shown as bar graphs (the L/R settings are linked). You can also adjust the send 8 levels by dragging a bar graph to left or right. The bar graph display will change according to the send position (pre/post) and on/off status of the signal sent from the FX RTN channel to the MIX buses (➥ p.9). I PAN Specifies the panning of the signal sent from the FX RTN channel to the STEREO bus. (You can set L and R separately.) This may be BALANCE depending on the PAN mode. J SELECT Selects the FX RTN channel for which you want to perform operations. (L and R can be selected separately.) This is linked with the FX RTN channel strip [SEL] keys on the 9 PM5D panel. K CH ON (Channel on) button J Switches the FX RTN channel on/off. This is linked with the FX RTN channel strip CH K [ON] keys on the PM5D panel. L L Channel name This is a text box that displays the channel name. You can also edit the channel name in this text box. M Fader Adjusts the input level of the FX RTN channel. This is linked with the faders of the FX RTN channel strip on the PM5D panel. The numbers and alphabetical letters at the right of the fader indicate the DCA group and mute groups to which that channel belongs, and show the Recall Safe and Mute Safe status of the channel (➥ p.10). N CUE This button cue-monitors the signal of the FX RTN channel. This is linked with the FX M RTN channel strip [CUE] keys on the PM5D panel. If SOLO is active, this will function as SOLO. N 14 PM5DV2/DSP5D Editor Owner's Manual