Yamaha DSP5D Pm5dv2 / Dsp5d Editor Owner's Manual - Page 26

M COMP LINK GROUP (Compressor link group) Selects the compressor link group (1-8) to which that channel belongs. N KEY IN Selects the signal that will be used as the key-in signal. The types of signal that can be selected are the same as for the gate key-in signal (➥ p.24). ❏ INSERT (except for FX RTN channels) 1 2 3 4 5 A HA GAIN (head amp gain) and +48V Here you can adjust the HA gain for the input (if it has HA) that is patched to INSERT IN, and turn +48V on/off. B ON (On/off) Enables/disables insert-in/out. C OUT (Insert out) Here you can select the output port that will be assigned to insert-out, from the following choices. NONE MIXOUT1...MIXOUT24 OMNIOUT1...OMNIOUT24 S1-1, S1-2...S4-15, S4-16 FX1L, FX1R...FX8L, FX8R GEQIN1...GEQIN20 2TR D1L, 2TR D1R...2TR D3L, 2TR D3R No assignment The channels of MIX OUT jacks 1-24 This cannot be selected on the DSP5D The channels of OMNI OUT jacks 1-24 This cannot be selected on the DSP5D Output channels of an I/O card installed in slots 1-4 L/R inputs of internal effects 1-8 Inputs of GEQ modules 1-20 L/R channels of 2TR OUT DIGITAL jacks 1-3 This cannot be selected on the DSP5D D IN (Insert in) Here you can select the input port that will be assigned to insert-in, from the following choices. NONE AD1-AD48 AD1L, AD1R...AD4L, AD4R S1-1, S1-2...S4-15, S4-16 FX1L, FX1R...FX8L, FX8R GEQOUT 1-20 2TR D1L, 2TR D1R...2TR D3L, 2TR D3R 2TR A1L, 2TR A1R, 2TR A2L, 2TR A2R No assignment INPUT jacks 1-48 The L/R channels of ST IN jacks 1-4. Input channels of an I/O card installed in slots 1-4 L/R outputs of internal effects 1-8 Outputs of GEQ modules 1-20 L/R channels of 2TR IN DIGITAL jacks 1-3 This cannot be selected on the DSP5D L/R channels of 2TR IN ANALOG jacks 1/2 This cannot be selected on the DSP5D E POINT (Insert point) Selects the position at which insert-in/out will be patched. Choose from Pre EQ, Post EQ, Pre Delay, or Post Fader. 26 PM5DV2/DSP5D Editor Owner's Manual