Yamaha DSP5D Pm5dv2 / Dsp5d Editor Owner's Manual - Page 12
COMP Compressor, EQ Equalizer, DELAY, Channel number, MIX SEND, SELECT, CH ON Channel on button, Fader
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
8 H GATE Turns the gate on/off. The indicator immediately below the button shows the gate's on/ 9 off setting and the open/closed status (➥ p.9). J I COMP (Compressor) Switches the compressor on/off. When the compressor is on, the GR meter immediately below the button shows the amount of gain reduction. K J EQ (Equalizer) Switches the EQ on/off. The graph immediately below the button shows the approxi- L mate response of the EQ. You can drag the graph to edit the response of the EQ, or hold down the key ( key) of your computer keyboard and click the graph to reset it to a flat response. K DELAY Switches the delay on/off. You can also edit the delay time by dragging the numeric value located immediately below the button up or down L Channel number This is the number of the ST IN channel for this module. You can double-click this M number to open the Selected Channel window for this channel. If you hold down your computer keyboard's key ( key) and double-click this, the Locked window will open. M MIX SEND The send levels of the signals sent from the ST IN channel to the MIX buses are shown as bar graphs. You can also adjust the send levels by dragging a bar graph to left or right. The bar graph display will change according to the send position (pre/post) and on/off status of the signal sent from the ST IN channel to the MIX buses (➥ p.9). N PAN N Specifies the panning of the signal sent from the ST IN channel to the STEREO bus. (You can set L and R separately.) This may be BALANCE depending on the PAN mode. O O SELECT P Q Selects the ST IN channel for which you want to perform operations. (L and R can be selected separately.) This is linked with the ST IN channel strip [SEL] keys on the PM5D panel. P CH ON (Channel on) button Switches the ST IN channel on/off. This is linked with the ST IN channel strip CH R [ON] keys on the PM5D panel. Q Channel name This is a text box that displays the channel name. You can also edit the channel name in this text box. R Fader Adjusts the input level of the ST IN channel. This is linked with the faders of the ST IN channel strip on the PM5D panel. The numbers and alphabetical letters at the right of the fader indicate the DCA group and mute groups to which that channel belongs, and show the Recall Safe and Mute S Safe status of the channel (➥ p.10). S CUE This button cue-monitors the signal of the ST IN channel. This is linked with the ST IN channel strip [CUE] keys on the PM5D panel. If SOLO is active, this will function as SOLO. 12 PM5DV2/DSP5D Editor Owner's Manual