Yamaha DSP5D Pm5dv2 / Dsp5d Editor Owner's Manual - Page 3
DSP5D Editor: System Setup, Mixer Setup, Input port/Output port, Fast Sync, Level Meter, System Color
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
❏ DSP5D Editor: System Setup To open the System Setup window, choose [System Setup] from the [File] menu. You must specify the Input port and Output port. Input port/Output port: From the ports you have previously specified in Studio Manager, select the ports you will use for communication with the DSP5D. Fast Sync: This shortens the time required for synchronization with the DSP5D. If synchronization fails, you should disable (clear) this item. Level Meter: This specifies whether level meter data will be included in the communication with the DSP5D. If this check box is selected, level meter data from the DSP5D will be received, but the response speed may be slower. If you feel that the response is slow, clear this check box. System Color: You can change the workspace color of DSP5D Editor. Choose one of eight colors from the pulldown menu. This is convenient when you need to distinguish between multiple instances of DSP5D Editor. Set Default: By clicking this button, you can store the current System Setup settings as the default values for DSP5D Editor. ❏ Mixer Setup To open the Mixer Setup window, choose [Mixer Setup] from the [File] menu. Pair Mode: Select whether faders will be paired Horizontally or Vertically. Pan Nominal Position: Select whether the signal will be at nominal level when panned to the center (Center) or when panned all the way to left or right (LR). You can make separate settings for monaural channels and paired channels. Bus Setup: Select the MIX bus mode (VARI/FIXED) for every two adjacent odd-numbered/even-numbered MIX buses. MIX buses assigned as surround buses are indicated as "SURROUND" and cannot be changed. Surround Bus Allocation: Select the MIX buses (MIX 1-8 or MIX 9-16) that will be used as surround buses. Stereo B Setup: Specify whether the same signal as the STEREO A bus will be sent to the STEREO B bus (Stereo Bus), or whether the STEREO B bus will function as the CENTER bus for LCR mode (Center Bus). 3 PM5DV2/DSP5D Editor Owner's Manual
![](/manual_guide/products/yamaha-dsp5d-pm5dv2-dsp5d-editor-owners-manual-858ca2d/3.png)