ZyXEL N220 User Guide - Page 19
Application Overview, 1.3.1 Infrastructure - not connecting
View all ZyXEL N220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Chapter 1 Getting Started The following table describes the operation of the N220's LEDs. Table 2 N220 LEDs LED COLOR STATUS Orange Slow Blinking Rapid Blinking Off DESCRIPTION The N220 is turned on, connected to an AP, and is not transmitting or receiving data. The N220 is turned on, connected to an AP, and is transmitting or receiving data. It also blinks when the WPS feature is being used or a WPS connection is being initiated. The N220 is turned off. 1.3 Application Overview This section describes some network applications for the N220. You can either set the network type to Infrastructure and connect to an AP or use Ad-Hoc mode and connect to a peer computer (another wireless device in Ad-Hoc mode). 1.3.1 Infrastructure To connect to a network via an access point (AP), set the N220 network type to Infrastructure (see Chapter 4 on page 62). Through the AP, you can access the Internet or the wired network behind the AP. Figure 2 Application: Infrastructure N220 User's Guide 19