Home » ZyXEL Manuals » Wireless » ZyXEL N220 » Manual Viewer

ZyXEL N220 User Guide - Page 31

Creating and Using a Profile, - not working

Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Chapter 2 Tutorial 6 The ZyXEL utility returns to the Link Info screen while it connects to the wireless network using your settings. When the wireless link is established, the ZyXEL utility icon in the system tray turns green and the Link Info screen displays details of the active connection. Check the network information in the Link Info screen to verify that you have successfully connected to the selected network. If the wireless client is not connected to a network, the fields in this screen remain blank. See Table 4.3 on page 51 for detailed field descriptions. Figure 12 ZyXEL Utility: Link Info 7 Open your Internet browser and enter http://www.zyxel.com or the URL of any other web site in the address bar. If you are able to access the web site, your wireless connection is successfully configured. If you cannot access the web site, check the Troubleshooting section of this User's Guide or contact your network administrator if necessary. 2.3.2 Creating and Using a Profile A profile lets you automatically connect to the same wireless network every time you use the ZyXEL utility. You can also configure different profiles for different networks, for example if you connect a notebook computer to wireless networks at home and at work. This example illustrates how to set up a profile and connect the wireless client to an access point configured for WPA-PSK security. In this example, the AP's SSID is "SSID_Example3" and its pre-shared key is "ThisismyWPA-PSKpre-sharedkey". You have chosen the profile name "PN_Example3". N220 User's Guide 31

Section	Page
N220	1
About This User's Guide	3
Document Conventions	5
Safety Warnings	7
Contents Overview	9
Table of Contents	11
Introduction and Configuration	15
Getting Started	17
1.1 Overview	17
1.1.1 What You Need to Know	17
1.1.2 Before You Begin	18
1.2 About Your N220	18
1.2.1 Hardware	18
1.3 Application Overview	19
1.3.1 Infrastructure	19
1.3.2 Ad-Hoc	20
1.4 Hardware and Utility Installation	20
1.4.1 ZyXEL Utility Icon	20
1.5 Configuration Methods	21
1.5.1 Enabling Windows Wireless Configuration	21
1.5.2 Accessing the ZyXEL Utility	21
Tutorial	23
2.1 Overview	23
2.1.1 What You Can Do in This Tutorial	23
2.1.2 What You Need to Know	23
2.1.3 Before You Begin	24
2.2 Connecting to an AP using Wi-Fi Protected Setup (WPS)	24
2.2.1 Push Button Configuration (PBC)	24
2.2.2 PIN Configuration	25
2.3 Connecting to an AP Without Using WPS	29
2.3.1 Manually Connecting to a Wireless LAN	29
2.3.2 Creating and Using a Profile	31
2.4 Configuring the N220 as an AP	34
Wireless LANs	37
3.1 Overview	37
3.1.1 What You Can Do in This Section	37
3.1.2 What You Need to Know	37
3.1.3 Before You Begin	38
3.2 Wireless LAN Overview	38
3.3 Wireless LAN Security	39
3.3.1 User Authentication and Encryption	39
3.4 WiFi Protected Setup	41
3.4.1 Push Button Configuration	42
3.4.2 PIN Configuration	42
3.4.3 How WPS Works	44
3.4.4 Limitations of WPS	47
Station Mode	49
4.1 Overview	49
4.1.1 What You Can Do in This Section	49
4.1.2 What You Need to Know	49
4.1.3 Before You Begin	50
4.2 ZyXEL Utility Screen Summary	50
4.3 The Link Info Screen	51
4.3.1 Trend Chart	53
4.4 The Site Survey Screen	54
4.4.1 Security Settings	55
4.4.2 Summary Screen	61
4.5 The Profile Screen	62
4.5.1 Adding a New Profile	63
4.6 The Adapter Screen	68
4.6.1 WPS: PBC (Push Button Configuration)	69
4.6.2 WPS: PIN - Use this Device’s PIN	69
4.6.3 WPS: PIN - Use the PIN from the AP or Wireless Router	70
4.7 Security Settings in Windows Vista	71
4.7.1 Using PEAP in Vista	72
4.7.2 Using TLS in Vista	73
AP Mode	75
5.1 Overview	75
5.1.1 What You Can Do in This Section	76
5.1.2 What You Need to Know	76
5.1.3 Before You Begin	76
5.2 AP Mode Screen Summary	77
5.3 The Link Info Screen	77
5.4 The Configuration Screen	78
5.4.1 Security Settings	80
5.5 The MAC Filter Screen	82
Maintenance	85
6.1 Overview	85
6.1.1 What You Can Do in This Section	85
6.1.2 What You Need to Know	85
6.1.3 Before You Begin	85
6.2 The About Screen	86
6.3 Uninstalling the ZyXEL Utility	86
6.4 Upgrading the ZyXEL Utility	87
Troubleshooting and Specifications	89
Troubleshooting	91
7.1 Power, Hardware Connections, and LEDs	91
7.2 Accessing the ZyXEL Utility	92
7.3 Link Quality	92
7.4 Problems Communicating with Other Computers	93
Product Specifications	95
Appendices and Index	99
Setting Up Your Computer’s IP Address	101
Wireless LANs	131
Windows Wireless Management	147
Wireless for Windows 7	173
Legal Information	179

Match case Limit results 1 per page

Chapter 2 Tutorial

N220 User’s Guide

The ZyXEL utility returns to the

Link Info

screen while it connects to the wireless

network using your settings. When the wireless link is established, the ZyXEL

utility icon in the system tray turns green and the

Link Info

screen displays

details of the active connection. Check the network information in the

Link Info

screen to verify that you have successfully connected to the selected network. If

the wireless client is not connected to a network, the fields in this screen remain

blank. See

Table 4.3 on page 51

for detailed field descriptions.

Figure 12

ZyXEL Utility: Link Info

Open your Internet browser and enter

http://www.zyxel.com

or the URL of any

other web site in the address bar. If you are able to access the web site, your

wireless connection is successfully configured. If you cannot access the web site,

check the Troubleshooting section of this User's Guide or contact your network

administrator if necessary.

2.3.2

Creating and Using a Profile

A profile lets you automatically connect to the same wireless network every time

you use the ZyXEL utility. You can also configure different profiles for different

networks, for example if you connect a notebook computer to wireless networks at

home and at work.

This example illustrates how to set up a profile and connect the wireless client to

an access point configured for WPA-PSK security. In this example, the AP’s SSID is

“SSID_Example3” and its pre-shared key is “ThisismyWPA-PSKpre-sharedkey”.

You have chosen the profile name “PN_Example3”.