ZyXEL N220 User Guide - Page 73
Using TLS in Vista,
View all ZyXEL N220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Chapter 4 Station Mode 7 Click OK. The Enter Credentials screen disappears and the N220 tries to connect to the network. The ZyXEL utility's Link Info screen displays, showing the connection status (see Section 4.3 on page 51). If the Link Info screen displays an active connection, you have successfully completed the procedure. 4.7.2 Using TLS in Vista Take the following steps to set up WPA, WPA2 or 802.1x security using TLS in Windows Vista. 1 Either select the AP to which you want to connect in the Site Survey screen (see Section 4.4 on page 54), or configure a profile (see Section 4.5 on page 62) in the normal way. 2 In the WPA, WPA2 or 802.1x security screen, select TLS as the EAP Type. Note that the Login Name, Certificate and Validate Server Certificate fields are greyed-out (not available). 3 Click Next. 4 In the Summary screen, click Save. 5 A message similar to the following appears in the bottom-right of your screen. Click the message. Figure 51 Vista Security: Additional Information Required 6 The Select Certificate screen displays. Select the certificate you want to use in order to authenticate with the server, and enter your username. Figure 52 Vista Security: Select Certificate Note: If you do not have the right certificate, or are not sure which certificate you should use, contact your network administrator. N220 User's Guide 73