ZyXEL N220 User Guide - Page 34
Configuring the N220 as an AP
View all ZyXEL N220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Chapter 2 Tutorial 7 Click Activate Now to use the new profile immediately. Otherwise, click the Activate Later button to go back to the Profile List screen. If you clicked Activate Later you can select the profile from the list in the Profile screen and click Connect to activate it. Note: Only one profile can be activated and used at any given time. Figure 18 ZyXEL Utility: Profile Activate 8 When you activate the new profile, the ZyXEL utility goes to the Link Info screen while it connects to the AP using your settings. When the wireless link is established, the ZyXEL utility icon in the system tray turns green and the Link Info screen displays details of the active connection. 9 Make sure the selected AP in the active profile is on and connected to the Internet. Open your Internet browser, enter http://www.zyxel.com or the URL of any other web site in the address bar and press ENTER. If you are able to access the web site, your new profile is successfully configured. 10 If you cannot access the Internet, go back to the Profile screen. Select the profile you are using and click Edit. Check the details you entered previously. Also, refer to the Troubleshooting section of this User's Guide or contact your network administrator if necessary. 2.4 Configuring the N220 as an AP In access point mode, your N220 allows you to set up your wireless network without using a dedicated AP. See Chapter 5 on page 75 for more information. After you install the ZyXEL Utility and then connect the N220 to your computer, follow the steps below to set up your N220 as an AP. 34 N220 User's Guide