ZyXEL P-2002 User Guide - Page 68
Table 16
View all ZyXEL P-2002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
P-2002 Series User's Guide Figure 28 Phone Port The following table describes the labels in this screen. Table 16 Phone Port LABEL DESCRIPTION Phone Port Settings Use this field to select the phone port that you want to configure. Speaking Volume Use this field to set the loudness that the Prestige uses for the speech signal that it sends to the peer device. -1 is the quietest and 1 is the loudest. Listening Volume Use this field to set the loudness that the Prestige uses for the speech signal that it receives from the peer device and sends to your phone. -1 is the quietest and 1 is the loudest. Outgoing Call use G.168 Active SIP 1 and SIP 2 correspond to the Prestige's SIP accounts. Select whether you want the phone(s) attached to this phone port to use SIP account 1, 2 or both when you make a call. If you select both SIP accounts, the Prestige will first try to use SIP account 2 and then SIP account 1 when you make a call. Select this check box to cancel the echo caused by the sound of your voice reverberating in the telephone receiver while you talk. VAD Support Dialing Interval Select this check box to use Voice Activity Detection (VAD). VAD reduces the bandwidth that a call uses by not transmitting when you are not speaking. When you are dialing a telephone number the Prestige waits this long after you stop pressing the buttons before initiating the call. Select how many seconds you want the Prestige to wait after the last input on the telephone's keypad before dialing (making) a call. 68 Chapter 7 Phone