ZyXEL Vantage Report 2.3 User Guide - Page 39

Chapter 3 The Web Configurator Table 8 Device Window SECTION DESCRIPTION 3 To move a device in the device tree, • right-click on the device, and select Cut it. Then right-click the destination folder and select Paste to. To select which device is included in a report, • click on the device. To look at the basic information about a device, • click on the device. The Device Information screen appears in the report and setting window. (See Figure 11.) To edit the basic information about a device, • right-click on the device, and select Edit Device. The Edit Device screen appears in the device window. (See Figure 11.) To edit the basic information about a folder, • right-click on the folder, and select Edit Folder. The Edit Folder screen appears in the device window. (See Figure 11.) To remove a device from Vantage Report, • right-click on the device, and select Delete Device. Vantage Report confirms you want to delete it before doing so. To remove a folder from Vantage Report, • right-click on the folder, and select Delete Folder. Vantage Report confirms you want to delete it before doing so. 4 To search for a device, • type any part of the name, MAC address, or note and click the magnifying glass. If a match is found, Vantage Report highlights the device in the device window, but the report and setting window does not change. If a match is not found, you get a message. You can click the magnifying glass again to look for another match. When you add a device to Vantage Report, you can specify the name, MAC address, type, and any notes for the device. When you click on the device, this information is displayed in the report and setting window (see Section 3.6.1 on page 53). When you edit a device, however, you can only edit the name and the notes. If you want to update the MAC address or device type, you have to delete Vantage Report User's Guide 39