ZyXEL Vantage Report 2.3 User Guide - Page 650
Table 300, Table 301, Table 302
View all ZyXEL Vantage Report 2.3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 650 highlights
Appendix C ZyNOS Log Descriptions Table 300 CDR Logs LOG MESSAGE DESCRIPTION board %d line %d channel %d, call %d, %s C01 Outgoing Call dev=%x ch=%x %s The router received the setup requirements for a call. "call" is the reference (count) number of the call. "dev" is the device type (3 is for dial-up, 6 is for PPPoE, 10 is for PPTP). "channel" or "ch" is the call channel ID. For example,"board 0 line 0 channel 0, call 3, C01 Outgoing Call dev=6 ch=0 "Means the router has dialed to the PPPoE server 3 times. board %d line %d channel %d, The PPPoE, PPTP or dial-up call is connected. call %d, %s C02 OutCall Connected %d %s board %d line %d channel %d, The PPPoE, PPTP or dial-up call was disconnected. call %d, %s C02 Call Terminated Table 301 PPP Logs LOG MESSAGE DESCRIPTION ppp:LCP Starting The PPP connection's Link Control Protocol stage has started. ppp:LCP Opening The PPP connection's Link Control Protocol stage is opening. ppp:CHAP Opening The PPP connection's Challenge Handshake Authentication Protocol stage is opening. ppp:IPCP Starting The PPP connection's Internet Protocol Control Protocol stage is starting. ppp:IPCP Opening The PPP connection's Internet Protocol Control Protocol stage is opening. ppp:LCP Closing The PPP connection's Link Control Protocol stage is closing. ppp:IPCP Closing The PPP connection's Internet Protocol Control Protocol stage is closing. Table 302 UPnP Logs LOG MESSAGE UPnP pass through Firewall DESCRIPTION UPnP packets can pass through the firewall. 650 Vantage Report User's Guide