ZyXEL Vantage Report 2.3 User Guide - Page 571
System Setting > Rule-based Alert > Add/Edit > Interface Usage
View all ZyXEL Vantage Report 2.3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 571 highlights
Chapter 14 System Setting The fields above are described in the following table. Table 254 System Setting > Rule-based Alert > Add/Edit > Interface Usage LABEL DESCRIPTION Condition Select Interface Usage in this field. Interface Type Select which interface mode you want to monitor. Interface refers to the connectivity implementation of the device to the network or other devices. Choose one of the following. Interface Name Direction Traffic.. KBytes/s • Ethernet • VLAN • PPP (stands for Point-to-Point Protocol) • Bridge • Dial-backup • 3G (stands for 3rd Generation) • wireless Select the specific name for devices that can have multiple interface profiles. Select if you want to check outgoing (Tx) or incoming (Rx) traffic. You can also choose both (Tx+Rx). Set your filters according to how much system resources are being consumed by monitored devices. The following parameters can be used. • >= - Select this if you want to be alerted when a device uses resources greater than or equal to the value you set. • - Select this if you want to be alerted when a device uses resources less than the value you set. Period.. minutes For example, choose Ethernet, specifying lan1 interface and Tx direction, select >= and set the percentage value to 100 KByte/s. This means Vantage Report sends an alert once a monitored device uses or exceeds 100 KBytes/s outgoing traffic on lan1 of the Ethernet interface for a set time (see Period.. minutes field below). Set this to the number of minutes the condition persists before Vantage Report sends out an alert. Using the previous example, you can set the period to 5 minutes. This means that if the device reaches or exceeds 100 KByte/s of interface traffic for 5 minutes, Vantage Report sends out an alert. See Section Table 252 on page 568 for descriptions of other table fields found in this screen. Vantage Report User's Guide 571