Apple M8760LL Service Guide - Page 34
case from seating, use the pointed end of a black stick through the screw hole
UPC - 718908426234
View all Apple M8760LL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
6. Lay the top case against the open display, as shown. 7. Connect the flex cables from the top case to the logic board. 8. Lift the top case slightly and rotate it down over the bottom case (verify that the cables are folding properly) and align the corners. 9. Start at the right corner and guide the top case onto the bottom case. Use a black stick to carefully pull or push tabs slightly, if needed. Note: Some side screws have a flexible screw boss. If they block a tab on the top case from seating, use the pointed end of a black stick through the screw hole to push on the boss slightly. Important: The tabs are fragile. Do not apply too much pressure or bend them. Important: The top case should lay flat along the sides and top, if not, make sure that cables and components are not interfering. 32 - PowerBook G4 (15-inch FW800) Take Apart Top Case