Apple M8760LL Service Guide - Page 82

The two larger pads are interchangeable.

Page 82 highlights

5. Install new thermal pads onto the heatsink where removed, as shown below. Center each pad over the location that corresponds to the chip on the logic board and press into place, avoiding air pockets. Remove protective backing, if present. Note: The two larger pads are interchangeable. Important: Avoid unnecessary contact with thermal pads as dirt and body oils reduce the pad's conductivity. 80 - PowerBook G4 (15-inch FW800) Take Apart Logic Board

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152

80 -
PowerBook G4 (15-inch FW800) Take Apart
Logic Board
5.
Install new thermal pads onto the heatsink where removed, as shown below.
Center each pad over the location that corresponds to the chip on the logic board and
press into place, avoiding air pockets. Remove protective backing, if present.
Note:
The two larger pads are interchangeable.
Important:
Avoid unnecessary contact with thermal pads as dirt and body oils
reduce the pad's conductivity.