Bosch HSLP451UC Instructions for Use - Page 10

Basic Oven Settings User settings are available for the customer to customize the appliance to their liking. Many of these features should be adjusted when the oven is first installed or after a move to a new location. User settings can only be accessed from stand-by state. If the Settings button is pressed while the appliance is not in stand-by, the display will sound an error tone. Adjust Settings 1. Select the SETTINGS button on the control panel. 2. Press the SOFT KEY 2 to advance through the menu options. The following table lists the available setting options and their values. ITEM DESCRIPTION °F/°C (Temperature Units) Brightness Volume Clock Stand-by Clock Language Weight Unit Type Customer Service Demo Mode Steam Clean Descale Calibrate Water Hardness OPTIONS °F °C Low Med High Low Med High Off 12 hr 24 hr On Off English French lbs Kg Contact information only On Off See page 27. See page 28. See page 7. See page 7. 3. Press SOFT KEY 1 or the ENTER button on the control panel to edit the setting that is in field. 4. Press SOFT KEY 3 in order to cycle through the submenu options. 5. Set the option by pressing the ENTER key on the control panel or by pressing SOFT KEY 1. Setting Options °F/°C (TEMPERATURE UNITS): The temperature units setting allows the user to switch between fahrenheit and celsius units of temperature. The default temperature unit setting is "Fahrenheit". BRIGHTNESS: The brightness setting allows the user to adjust the brightness of the display. Switching between values adjusts the backlighting of the display. The default brightness setting is "High". VOLUME: The volume setting allows the user to adjust the sound level of button presses. The default volume setting is "High". CLOCK: The clock mode setting allows the user to select a 12 hour or 24 hour based clock. The default clock mode setting is "12 hour". STAND-BY CLOCK: The stand-by clock setting allows the user to disable the clock whenever the user interface goes into stand-by state. The default stand-by clock display setting is "On". LANGUAGE: The language setting allows the user to select either English or French operating languages. The default language setting is "English". WEIGHT UNIT TYPE: The weight unit setting allows the user to switch between pounds (lbs.) and kilograms (Kg) units of measure. The default weight unit setting is "lbs". CUSTOMER SERVICE: Contact information for the Technical Service Department if your appliance needs repair. Contains the following: Visit us at: www.bosch-home.com/us Or call 1-800-944-2904 DEMO MODE: Demo mode consists of 6 images cycled at timed intervals. If any button is pressed, the user interface appears to work as normal for the pressed button. However, no real cooking mode information is passed to the appliance. Therefore the oven will not heat up, preheat will never end, self clean will not start, etc. After 30 seconds with no input from the user, the display resumes the image slide show. STEAM CLEAN: You may use steam to dissolve food residues and spills so that they can be easily wiped up. Running the steam clean cycle takes 30 - 35 minutes. The oven cannot be used for any other purpose while steam cleaning is underway. Detailed instructions for steam cleaning the oven are provided in the "Cleaning and Maintenance" section of this manual starting on page 26. The oven cannot be used for any other purpose while steam cleaning is in progress. English 8