Bosch HSLP451UC Instructions for Use - Page 32

Service

Page 32 highlights

Service Before Calling Service Troubleshooting If you encounter a problem, it often will merely be something minor. Before you call customer service, consider the suggestions and instructions below. PROBLEM Appliance is not working POSSIBLE CAUSE Cord is not plugged in Power outage Circuit breaker may be tripped. Faulty operation Appliance does not start Appliance door is not closed all the way. Water tank empties without any Water tank was not closed properly. apparent reason. Evaporator dish is overflowing. Tank lid seal is dirty. Tank lid seal is not functioning. Evaporator dish has been boiled Water tank was not inserted correctly. dry even though the water tank is full Supply line is clogged. TIP/SOLUTION Connect appliance to power. Check if other kitchen appliances are working. Reset breaker. Turn off power to the appliance at the main power supply (fuse or breaker box) and turn it back on after approximately 10 seconds. Close the appliance door. Close the tank lid until it clearly snaps into place. Clean the seal. A new water tank may be purchased through customer service. Slide in the water tank until it locks into place. Descale appliance. A "plop" noise can be heard when Temperature change affecting frozen food This is normal. cooking and caused by water vapor. Steam escapes from the vent openings when cooking This is normal. Appliance no longer produces steam correctly The appliance needs to be descaled. Descale appliance. English 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75

English 30
Service
Before Calling Service
Troubleshooting
If you encounter a problem, it often will merely be something minor. Before you call customer service, consider the
suggestions and instructions below.
PROBLEM
POSSIBLE CAUSE
TIP/SOLUTION
Appliance is not working
Cord is not plugged in
Connect appliance to power.
Power outage
Check if other kitchen appliances are
working.
Circuit breaker may be tripped.
Reset breaker.
Faulty operation
Turn off power to the appliance at the
main power supply (fuse or breaker box)
and turn it back on after approximately
10
seconds.
Appliance does not start
Appliance door is not closed all the way.
Close the appliance door.
Water tank empties without any
apparent reason. Evaporator dish
is overflowing.
Water tank was not closed properly.
Close the tank lid until it clearly snaps into
place.
Tank lid seal is dirty.
Clean the seal.
Tank lid seal is not functioning.
A new water tank may be purchased
through customer service.
Evaporator dish has been boiled
dry even though the water tank is
full
Water tank was not inserted correctly.
Slide in the water tank until it locks into
place.
Supply line is clogged.
Descale appliance.
A "plop" noise can be heard when
cooking
Temperature change affecting frozen food
and caused by water vapor.
This is normal.
Steam escapes from the vent
openings when cooking
This is normal.
Appliance no longer produces
steam correctly
The appliance needs to be descaled.
Descale appliance.