Bosch HSLP451UC Instructions for Use - Page 31

Maintenance

Get Bosch HSLP451UC PDF manuals and user guides View all Bosch HSLP451UC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

11. After 20 seconds, a beep will signal the end of the rinsing cycle. 12. Wipe any remaining water from the evaporator dish with a cleaning sponge. Wipe out the oven. Thoroughly rinse out the cleaning sponge. 13. Dry the oven cavity with a soft cloth. 14. Press ENTER. Rack Cleaning Removing racks 1. Carefully press the front of the rack up until it unhinges and release it sideways from the bracket (image A). 2. Unhinge the rack from the bracket and remove it (image B). % Maintenance To Replace the Steam Oven Light Bulb Heat-resistant 230V / 25W max. halogen bulbs with seals can be purchased through retail stores or customer service. When purchasing through customer service provide the appliance model and serial numbers. 1. Turn off power to the appliance at the main power supply (breaker box). 2. Rotate the cover counterclockwise. 3. Remove the bulb by grasping and pulling the bulb straight back. 4. Grasp the replacement bulb with a clean dry cloth. DO NOT touch the glass of the new replacement bulb with your fingers. It may cause the bulb to fail when it first lights. $ 3. Clean racks with dish detergent and dish sponge/brush or clean racks in the dishwasher. Reinserting racks 1. Insert the rack with the indentations facing up. The racks each only fit on one side. 2. Hook rack in back and push it back until it engages (image C). 3. Hook rack on the front bracket and press down until it engages and is horizontally secured in the appliance (image D). & ' 5. Locate the two prongs in the ceramic holder, gently poking until the two prongs locate in the ceramic socket. 6. Ensure the seals and tension ring are on the glass cover. Screw the glass cover on. 7. Reconnect the appliance to power. IMPORTANT: DO NOT operate the appliance without the glass cover or seals. English 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
English 29
11.
After 20 seconds, a beep will signal the end of the
rinsing cycle.
12.
Wipe any remaining water from the evaporator dish
with a cleaning sponge. Wipe out the oven. Thoroughly
rinse out the cleaning sponge.
13.
Dry the oven cavity with a soft cloth.
14. Press
ENTER
.
Rack Cleaning
Removing racks
1.
Carefully press the front of the rack up until it unhinges
and release it sideways from the bracket (image
A).
2.
Unhinge the rack from the bracket and remove it
(image
B).
3.
Clean racks with dish detergent and dish sponge/brush
or clean racks in the dishwasher.
Reinserting racks
1.
Insert the rack with the indentations facing up. The
racks each only fit on one side.
2.
Hook rack in back and push it back until it engages
(image C).
3.
Hook rack on the front bracket and press down until it
engages and is horizontally secured in the appliance
(image D).
Maintenance
To Replace the Steam Oven Light Bulb
Heat-resistant 230V / 25W max. halogen bulbs with seals
can be purchased through retail stores or customer
service. When purchasing through customer service
provide the appliance model and serial numbers.
1.
Turn off power to the appliance at the main power
supply (breaker box).
2.
Rotate the cover counterclockwise.
3.
Remove the bulb by grasping and pulling the bulb
straight back.
4.
Grasp the replacement bulb with a clean dry cloth.
DO
NOT
touch the glass of the new replacement bulb with
your fingers. It may cause the bulb to fail when it first
lights.
5.
Locate the two prongs in the ceramic holder, gently
poking until the two prongs locate in the ceramic
socket.
6.
Ensure the seals and tension ring are on the glass
cover. Screw the glass cover on.
7.
Reconnect the appliance to power.
IMPORTANT:
DO NOT
operate the appliance without the glass cover or
seals.