Brother International CW-1000 Owners Manual - English - Page 120
Troubleshooting
View all Brother International CW-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Troubleshooting Your unit has been precision-manufactured to give you years of trouble-free use. In the rare case that trouble does happen, you will probably be able to find the solution in the table below. If you can not, please do not attempt to repair the machine yourself. Instead, contact your dealer. NOTE: Make sure to turn the power off before applying any remedy. Trouble Remedy Nothing works after the machine has been switched on. • Check that the power cord is plugged in. • Check that the AC adapter is the correct type. • Check the LCD contrast. See "Adjusting the LCD (display) Contrast" on page 39. Printout is impossible or difficult to read. • Check that the ink cartridge is installed correctly. • Clean the ink cartridge. See "Cleaning the Print Head" on page 116. • Check to see if the ink cartridge is empty (refer to the illustration below). If necessary, change the ink cartridge. White horizontal lines appear in the printed text. • Pull the cartridge release lever toward you and push it in again. • Clean the ink cartridge. See "Cleaning the Print Head" on page 116. Paper jams. • Remove the jammed paper. • Check the amount of paper in the cassette. See "Setting Up Report or Check Paper" on page 15. All seems normal after the machine has been switched on, but the display is difficult to read. • Adjust the LCD contrast. See "Adjusting the LCD (display) Contrast" on page 39. 114 New cartridge Empty cartridge