Brother International CW-1000 Owners Manual - English - Page 42
Setting, Print, Format
View all Brother International CW-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Setting Your Print Format Check formats do vary from bank to bank. If the preset print format does not match your check forms, you must enter the correct starting position of each item to be changed. To set up a complete check printing format, you must enter data for the following items: • PRINT POSITION the starting position of each item to be printed on the check • PRINT CONTRAST the printing density (light or normal) • FONT standard or italic characters 0 4 0 Press ( S FTUP) and select PRINT FORMAT. Refer to "Selecting an Item to Set Up" on page 29. Use (---") and (---) to display the desired item. Press (RETURN [PRINT FORMAT] 1:PRINT POSITION V page 36 [PRINT FORMAT] 2:PRINT CONTRAST page 38 [PRINT FORMAT] 3:FONT -3 page 38 Print Position You can change the print position of the following items: • DATE the position for the date • PAYEE • AMOUNT the position for the payee name the position for the amount (numerals) • SPELLOUT the position for the amount (in words) • MEMO the position for the comment A print position is defined by two coordinates (X and Y) as shown in the illustration below. The origin is at the lower-left corner of the cassette. To enter the coordinates for the position of an item, place an actual check in the cassette and use the marks on the paper guide to identify the printing position. The guide is marked in 1/16 inch units. Personalizing Your CheckWriter: Setup 36