Brother International CW-1000 Owners Manual - English - Page 17
immediately
View all Brother International CW-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Before You Start: Preparing Your Machine The battery will last for about one year. When the lithium battery becomes low, the power LED will flash on and off every half second and the following message will alternate with the current display: -- WARNING !! -BATTERY NEAR EMPTY When this message appears, you should immediately change the lithium battery. If you do not do so, there is a risk that your data will be deleted from the memory. Purchase a new battery of the same type (CR2032). Make sure that the power is on, and remove the old lithium battery. Insert the new battery as explained on the previous page. -- ALARM !! -BATTERY EMPTY If this message appears, proceed urgently as explained above. After replacing the lithium battery, turn the power off, then on again and confirm that the battery warning or alarm message does not appear. A Warning: O Some danger of explosion exists if the lithium battery is incorrectly replaced. Replace only with a battery of the same type (CR2032) or equivalent. Keep lithium batteries away from children. Never throw a lithium battery in fire. Be sure to dispose of used lithium batteries according to the manufacturer's instructions and local requirements. A Caution: 0 This battery is notfor using your unit without the ACpower adapter. 0 When installing a new lithium battery, make sure that the power is on. Installing a new lithium battery while the power is off may cause malfunction when you turn the power on. Making sure that the power is on when you replace the lithium battery also prevents data in the memory from being erased. If the machine is left unattendedfor alongperiod, the lithium battery will discharge, and there is a risk of data loss. To prevent this, change the lithium battery at least once a year. 11