Brother International DCP 585CW Network Users Manual - English - Page 92
Node Name, Network, Wired LAN, TCP/IP
UPC - 012502620464
View all Brother International DCP 585CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Control panel setup Node Name 6 You can register the machine name on the Network. This name is often referred to as a NetBIOS name; it will be the name that is registered by the WINS server on your network. Brother recommends the name BRNxxxxxxxxxxxx for a wired network or BRWxxxxxxxxxxxx for a wireless network (where xxxxxxxxxxxx is your machine's Ethernet address) (up to 15 characters). a Press Menu. b Press a or b to choose Network. Press OK. c (For Wired) Press a or b to choose Wired LAN. (For Wireless) Press a or b to choose WLAN. Press OK. d Press a or b to choose TCP/IP. Press OK. 6 e Press a or b to choose Node Name. Press OK. f Enter the Node Name. Press OK. Note DCP models cannot change the Node Name from the control panel menu. g Press Stop/Exit. For MFC-5490CN 6 a Press Menu, 5, 1, 5. b Select 1 to change. Enter the Node Name. Press OK. c Press Stop/Exit. For Touchscreen models 6 a Press MENU. b Press Network. c (For Wired) Press Wired LAN. (For Wireless) Press WLAN. d Press TCP/IP. e Press a or b to display Node Name and then press Node Name. f Enter the Node Name. Press OK. g Press Stop/Exit. 82