Brother International HL-1660 Users Manual - English - Page 116

CHAPTER 4 CONTROL PANEL FONT Switch Pressing the FONT switch allows you to select fonts and symbol/character sets.  Notes When you use the FONT switch, note the following: • The FONT switch is effective in the HP LaserJet 4+, EPSON FX-850, and IBM Proprinter XL modes. However the settings are subject to the current emulation mode. Note that the FONT switch does not work in the BR-Script 2 mode. • If the application software supports font and symbol/character set selection, you do not need to set them with the FONT switch. The software or command setting overrides the switch setting. • If you want to use optional fonts other than the printer's resident fonts, be sure to install a font cartridge/card that has your desired fonts. The printer automatically selects the font that has exactly the same or similar characteristics as those you set through the software or with a command. If the installed font cartridge/card happens to have a font of similar characteristics, the printer will print with an unexpected font. • You can store the fonts you require on a flash memory card or HDD card only in the HP LaserJet 4+ mode or BR-Script 2 mode when one is installed. See "CARD OPERATION." Setting the Font and Symbol Set in the HP LaserJet 4+ Mode When the HP LaserJet 4+ emulation mode has been selected, the font and symbol set can be set separately as the primary or secondary font. The display shows the following setting menus: PRIMARY FONT SELECT FONT SYMBOL SET TABLE PRINT exit p Set the primary font. p Set the symbol set. p Print the code table. Exit 4-49