Brother International HL-1660 Users Manual - English - Page 45
Turning the Printer On and Off
View all Brother International HL-1660 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
CHAPTER 2 GETTING STARTED Turning the Printer On and Off Plugging in the Power Cord Plug in the power cord as follows: 1. Make sure that the POWER switch is OFF "O": the switch is on the front right hand side of the printer. 2. Attach the power cord to the printer and plug it into an appropriate AC outlet. Fig. 2-22 Plugging in the Power Cord ! Caution • Check the AC voltage. This printer should be operated at the specified voltage and frequency. • USA and Canada: • Europe and Australia: AC 110 to 120 V, 60 Hz AC 220 to 240 V, 50 Hz • Since this printer must be electrically grounded, the power cord should be connected to a grounded AC outlet. • The total length of the power cord, including extension cords, should not exceed 5 meters (16.4 feet). Use of a longer power cord may result in reduced voltage or malfunctions. • Do not unplug the power cord to turn off the printer. • The printer should be installed near a power outlet which is easily accessible. 2-19