Brother International HL-1660 Users Manual - English - Page 80

CHAPTER 4 CONTROL PANEL MODE Switch Settings in HP-GL Mode The following table shows all the selections you can make with the MODE switch in the HP-GL mode.  Note The mode menus and settings that can appear vary according to the current emulation mode, printer status, and any options that may be installed in the printer. Mode Menu Setting Menu Sub-Setting Menu INTERFACE MODE Same as LaserJet 4+ Mode (See 4-17.) FORMAT MODE PAGE FORMAT MODE PAPER=LETTER (See 4-20.) (For 110/120V mode) GRAPHICS MODE X OFFSET= 0 Y OFFSET= 0 exit PEN SETTING SETTING=PEN1 SIZE #=3 dots RESOLUTION MODE (See 4-28.) exit RESOLUTION HRC SETTING exit GRAY #=100% exit exit CHARACTER SET STANDARD SET ANSI ASCII ALTERNATE SET ANSI ASCII exit RESOLUTION=600 HRC=MEDIUM Setting LETTER, LEGAL, A4, A5, A6, B5, B6, EXECUTIVE, COM10, MONARCH, C5, and DL -500 (left) to +500 (right) dots -500 (up) to +500 (down) dots Exit to PAGE FORMAT MODE PEN1 to 6 (Set size and gray percentage for the selected pen. ) 1 to 10 dots (pen size in dots) (# is the selected pen number. ) 15, 30, 45, 75, 90, or 100% (# is the selected pen number. ) Exit to SETTING=PEN1-6 Exit to GRAPHICS MODE Standard character set See character sets on page 4-28. Alternate character set See character sets on page 4-28. Exit to GRAPHICS MODE Exit to FORMAT MODE 300 or 600 dpi OFF, LIGHT, MEDIUM, or DARK Exit to RESOLUTION MODE 4-13