Brother International HL-1660 Users Manual - English - Page 140

CHAPTER 4 CONTROL PANEL • You can set "MP FIRST=ON" so that you can use the MP tray paper first until it becomes empty and then switch to other paper sources which hold the same size of paper. You can set "MP FIRST=ON" for this purpose only when all the trays hold the same type and size of paper. When the MP tray paper size is different from paper in other trays, you must not select "ON" if you do not want to use MP tray paper. 2. Press the SET switch. MANUAL FEED The display shows manual feed mode with an asterisk as follows: MANUAL FEED=OFF* 1. Press the v or w switch to turn the manual feed mode on or off. 2. Press the SET switch to make the setting effective.  Note When you select the "MANUAL FEED=ON", note that the feeder set in the "FEEDER=####" menu is ignored and the manual feed mode from the multi-purpose tray is selected. You must set "MANUAL FEED=OFF" so that the feeder selection in the "FEEDER=####" menu can be effective. MP TRAY SETTING 1. The display then shows the MP tray setting menu. Press the SET switch to enter this menu. Then the display shows the current paper size setting for the multipurpose tray with an asterisk. MP SIZE=LETTER * 4-73