Brother International HL-1660 Users Manual - English - Page 86

BaudRate= 9600, CodeType=8 bits, Parity, Stop Bit=1 bits, Xon/Xoff=ON, DTRER =ON, Robust Xon =OFF

Get Brother International HL-1660 - B/W Laser Printer PDF manuals and user guides View all Brother International HL-1660 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 86 highlights

CHAPTER 4 CONTROL PANEL Display Message BaudRate= 9600 CodeType=8 bits Parity =NONE Stop Bit=1 bits Xon/Xoff=ON DTR(ER) =ON (Effective when Xon/Xoff=ON) Robust Xon =OFF (Effective when Xon/Xoff=ON) Parameters Baud rate (Data transfer speed) Code type (Data length) Parity (Data error check) Stop bits (Data separator) Xon/Xoff (Handshake protocol) Data terminal ready (ER) Robust Xon Settings 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 baud 7 bits or 8 bits None, even, or odd 1 or 2 ON: DTR & Xon/Xoff handshake OFF: DTR handshake only ON: Makes DTR (ER) low when the buffer is full. OFF: Does not make DTR (ER) low when the buffer is full. DTR(ER) goes low only when the printer is off-line. ON: Sends Xon while waiting. OFF: Sends Xon once, when the printer status changes from off-line to on-line. s Optional Interface If you have installed a commercial modular input/output (MIO) card in the printer, you can select the optional MIO interface in this mode. If the installed MIO card requires any optional interface settings, they appear under this menu. Set them, referring to the manual of the MIO card. I/F=OPTION  Note This setting appears only when the MIO card has been installed. For installation of the MIO card, see "MODULAR I/O CARD" in Chapter 5. 4-19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
CHAPTER 4 CONTROL PANEL
4–19
Display Message
Parameters
Settings
BaudRate= 9600
Baud rate
(Data transfer speed)
150, 300, 600, 1200, 2400, 4800,
9600
, 19200, 38400, 57600, 115200
baud
CodeType=8 bits
Code type
(Data length)
7 bits or
8 bits
Parity
=NONE
Parity
(Data error check)
None
, even, or odd
Stop Bit=1 bits
Stop bits
(Data separator)
1
or 2
Xon/Xoff=ON
Xon/Xoff
(Handshake protocol)
ON:
DTR & Xon/Xoff handshake
OFF:
DTR handshake only
DTR(ER) =ON
(Effective when
Xon/Xoff=ON)
Data terminal ready
(ER)
ON:
Makes DTR (ER) low when
the buffer is full.
OFF:
Does not make DTR (ER)
low when the buffer is full.
DTR(ER) goes low only
when the printer is off-line.
Robust Xon =OFF
(Effective when
Xon/Xoff=ON)
Robust Xon
ON:
Sends Xon while waiting.
OFF:
Sends Xon once, when the
printer status changes from
off-line to on-line.
Optional Interface
If you have installed a commercial modular input/output (MIO) card in the
printer, you can select the optional MIO interface in this mode. If the
installed MIO card requires any optional interface settings, they appear
under this menu. Set them, referring to the manual of the MIO card.
I/F=OPTION
Note
This setting appears only when the MIO card has been installed. For
installation of the MIO card, see
“MODULAR I/O CARD” in Chapter 5
.