Brother International HL-1660 Users Manual - English - Page 78

CHAPTER 4 CONTROL PANEL MODE Switch Settings in BR-Script 2 Mode The following table shows all the selections you can make with the MODE switch in the BR-Script 2 mode.  Note The mode menus and settings that can appear vary according to the current emulation mode, printer status, and any options that may be installed in the printer. Mode Menu Setting Menu Sub-Setting Menu Setting INTERFACE MODE Same as HP LaserJet 4+ Mode (See 4-17.) FORMAT MODE X OFFSET=0 -500 (left) to +500 (right) dots (See 4-22.) Y OFFSET=0 -500 (up) to +500 (down) dots exit Exit to PAGE FORMAT MODE RESOLUTION MODE RESOLUTION RESOLUTION=600 300 or 600 dpi (See 4-28.) APT SETTING APT=OFF ON or OFF HRC SETTING HRC=MEDIUM OFF, LIGHT, MEDIUM, or DARK exit Exit to RESOLUTION MODE CARD OPERATION (See 4-32.) When the commercial flash memory card or the HDD card has not been formatted: FORMAT CARD Format the flash memory card or the HDD card. exit Exit to CARD OPERATION CARD OPERATION When the commercial flash memory card or the HDD card has been formatted: (See 4-32.) EXECUTE DATA Execute the data on the card. DATA ID=##### Execute the selected data. exit Exit to EXECUTE DATA CARD LIST Print the contents of the card. SAVE SAVE DATA Send data to be saved. SET KEY--> END End saving the data. DATA ID=##### Set data ID for saved data. exit Exit to CARD OPERATION DELETE MACRO ID=##### Delete the selected macro. DATA ID=#### Delete the selected data. FONT ID=##### Delete the selected font. FORMAT CARD Format the card. SET -> DELETE ALL Execute formatting the card. exit Exit to FORMAT CARD OPERATION exit Exit to CARD OPERATION 4-11