Brother International HL-1660 Users Manual - English - Page 152
Demo Test Print, Print Config, Print Fonts I, Test Switch
View all Brother International HL-1660 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
CHAPTER 4 CONTROL PANEL TEST Switch You can test the printer or print out the list of fonts with the TEST switch. To do so, hold down the SHIFT switch and press the TEST switch. You will then enter the test mode where you may test the printer or print out the list of fonts. To test the printer, follow these steps: 1. Press the SEL switch to set the printer off-line. 2. Hold down the SHIFT switch and press the TEST switch. When you enter the test mode, the display shows the first test mode item. DEMO PAGE 3. Press the v or w switch until the desired test mode appears on the display. Display Message DEMO PAGE TEST PRINT PRINT CONFIG PRINT FONTS I PRINT FONTS C PRINT FONTS P exit Test Mode Prints out the demonstration. Performs the printer test and prints out the test pattern. Prints out the list of panel switch settings you have configured for the printer as user settings. Prints out the list of internal or resident fonts. Prints out the list of optional fonts stored in the font cartridge/card. Prints out the list of permanent download fonts. Exits from the test mode. The printer does not perform the test. 4-85