Brother International HL-1660 Users Manual - English - Page 90

CHAPTER 4 CONTROL PANEL The following settings can be made in this mode: Display Message PAPER =LETTER LEFT M = 0C P RIGHT M = 80C P TOP M =0.5" P BOTTOM M=0.5" P LINES = 60L P Page Format Mode Set cut sheet paper size to letter, A4, legal, B5, A5, B6, A6, or executive, or envelope size to COM10, Monarch, C5, or DL. Set the left margin at column 0-126 at 10cpi. Set the right margin at column 10-136 at 10cpi. See "List of Factory Settings" in this chapter. Set the top margin at a distance from the top edge of the paper: 0, 0.33, 0.5, 1.0, 1.5, or 2.0 inches. factory setting = 0.33 (NonHP), 0.5 (HP) Set the bottom margin at a distance from the bottom edge of the paper: 0, 0.33, 0.5, 1.0, 1.5, or 2.0 inches. factory setting = 0.33 (Non-HP), 0.5 (HP) Set the number of lines per page from 5 to 128 lines. See "List of Factory Settings" in this chapter. The letter "P" in the display messages indicates that the page orientation is portrait. The letter "L" is displayed when it is landscape. Display Message X OFFSET= 0 Y OFFSET= 0 Page Format Mode (Continued) Move the print start position (at the upper left corner on pages) horizontally up to -500 dots to the left or +500 dots to the right in 300dpi dot unit increments: factory setting = 0. Move the print start position (at the upper left corner on pages) vertically up to -500 dots downward or +500 dots upward in 300dpi dot increments: factory setting = 0. 4-23