Brother International HL-1660 Users Manual - English - Page 76

CHAPTER 4 CONTROL PANEL Mode Menu (Continued) INTERFACE MODE (Continued) FORMAT MODE (See 4-20.) RESOLUTION MODE (See 4-28.) PAGE PROTECTION (See 4-31.) CARD OPERATION (HP mode only) (See 4-32.) Setting Menu I/F AUTO (Continued) ORIENTATION AUTO MODE PAGE FORMAT MODE exit RESOLUTION HRC SETTING exit PROTECT=AUTO Sub-Setting Menu MIO Setting ORI=PORTRAIT AUTO LF=OFF AUTO CR=OFF AUTO WRAP=OFF AUTO SKIP=ON (HP mode) AUTO MASK=OFF (EPSON & IBM modes) exit PAPER =LETTER (For 110/120V model) PAPER =A4 (For 220/240V model) LEFT M = 0C RIGHT M = 80C (Letter, Portrait) RIGHT M = 78C (A4, Portrait) TOP M =0.5" (HP mode) BOTTOM M=0.5" (HP mode) LINES = 60L (HP, Letter, Portrait) LINES = 64L (HP, A4, Portrait) X OFFSET= 0 Y OFFSET= 0 exit RESOLUTION HRC=MEDIUM Setting Available only when a commercial MIO card has been installed. The settings available on the installed MIO card can appear under the sub-setting menu. PORTRAIT or LANDSCAPE ON ... LF + CR OFF ... CR only ON ... LF, FF, or VT + CR OFF ... LF, FF, or VT only ON ... Auto wrap on OFF ... Auto wrap off ON ... Auto FF at bottom margin OFF ... No FF at bottom margin ON ... Auto mask on OFF ... Auto mask off Exit to AUTO MODE LETTER, LEGAL, A4, A5, A6, B5, B6, EXECUTIVE, COM10, MONARCH, C5 and DL 0 to 126 columns 10 to 136 columns 10 to 136 columns 0, 0.33, 0.5, 1.0, 1.5, or 2.0" 0, 0.33, 0.5, 1.0, 1.5, or 2.0" 5 to 128 lines/page 5 to 128 lines/page -500 (left) to +500 (right) dots -500 (down) to +500 (up) dots Exit to PAGE FORMAT MODE Exit to FORMAT MODE 300 or 600 dpi OFF, LIGHT, MEDIUM, or DARK Exit to RESOLUTION MODE AUTO, OFF, LETTER, A4, or LEGAL When the commercial flash memory card or the HDD card has not been formatted: FORMAT CARD Format the flash memory card or the HDD card. exit Exit to CARD OPERATION 4-9