Brother International HL-1660 Users Manual - English - Page 75

USER'S GUIDE MODE Switch Settings in HP LaserJet 4+, EPSON FX-850, and IBM Proprinter XL Modes The following table shows all the selections you can make with the MODE switch in the HP LaserJet 4+, EPSON FX-850, and IBM Proprinter XL modes.  Note The mode menus and settings that can appear vary according to the current emulation mode, printer status, and any options that may be installed in the printer. Mode Menu INTERFACE MODE (See 4-17.) Setting Menu I/F=PARALLEL I/F=RS-232C I/F=OPTION I/F=AUTO Sub-Setting Menu Setting HIGH SPEED=ON ON or OFF BI-DIR=ON ON or OFF BaudRate= 9600 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, or 115200 baud CodeType=8 bits 7 or 8 bits Parity =NONE NONE, EVEN, or ODD Stop Bit=1 bits 1 or 2 stop bits Xon/Xoff=ON ON or OFF DTR (ER)=ON ON or OFF Robust Xon=OFF ON or OFF exit Exit to INTERFACE MODE Available only when a commercial MIO card has been installed. MIO Setting The settings available on the installed MIO card can appear under the sub-setting menu. exit Exit to INTERFACE MODE TIME OUT= 5s 1 to 99 seconds PRL Setting Bi-directional settings for AUTO HIGH SPEED=ON ON or OFF BI-DIR=ON ON or OFF exit Exit to PRL Setting RS-232C Setting Parameters for AUTO mode BaudRate= 9600 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, or 115200 baud CodeType=8 bits 7 or 8 bits Parity =NONE NONE, EVEN, or ODD Stop Bit=1 bits 1 or 2 stop bits Xon/Xoff=ON ON or OFF DTR (ER)=ON ON or OFF Robust Xon=OFF ON or OFF exit Exit to RS-232C Setting 4-8