Brother International HL-1660 Users Manual - English - Page 257

APPENDICES Command name Set/Cancel Underline Print Mode Set/Cancel Overline Print Mode Select DoubleHigh/DoubleWidth Mode Select Character Set II Select Character Set I Select Characters from All Character Table Select a Character from All Character Table Define 8-dot Download Characters Select Download Font Set Single-Density Bit Image Mode Set Double-Density Bit Image Mode Set Double-Speed Double-Density Bit Image Mode Set QuadrupleDensity Bit Image Mode Set Scalable Font Ratio (original) Execute Card Data (original) Function When n=1, subsequent characters (including spaces, but excluding horizontal tabs) are underlined. When n=0, this effect is canceled When n=1, subsequent characters (including spaces, but excluding horizontal tabs) are overlined. When n=0, this effect is canceled Depending on the values of m3 and m4, double-height and/or double-width printing is enabled or disabled Allows printing of the symbols in Character Set II Allows printing of the symbols in Character Set I Allows (n1 + (n2 x 256)) characters to be printed from the All Characters Table. Control codes in the data are ignored Prints one character (c) from the All Character Table Sequence ESC - n Decimal 27 45 n Hexadecimal 1B 2D n ESC _ n 27 95 n 1B 5F n ESC [ @ 4 0 0 0 m3 m4 ESC 6 27 91 64 4 0 0 0 m3 m4 27 54 1B 5B 40 04 00 00 00 m3 m4 1B 36 ESC 7 27 55 1B 37 ESC \ n1 n2 27 92 n1 n2 1B 5C n1 n2 {data} {data} {data} ESC ^ c 27 94 c 1B 5E c Allows definition of user-defined characters Selects font and print quality (n=0 or 2 internal fonts, n=4 or 6 - downloaded fonts) Selects and prints single-density bit-image data Selects and prints double-density bit image data Selects and prints "double speed" doubledensity bit image data ESC = n1 n2 sp m a1 a2 {data} ESC I n 27 61 n1 n2 1B 3D n1 n2 32 m a1 a2 20 m a1 a2 {data} {data} 27 73 n 1B 49 n ESC K n1 n2 {data} ESC L n1 n2 {data} ESC Y n1 n2 {data} 27 75 n1 n2 1B 4B n1 n2 {data} {data} 27 76 n1 n2 1B 4C n1 n2 {data} {data} 27 89 n1 n2 1B 59 n1 n2 {data} {data} Selects and prints quadruple-density bit image data ESC Z n1 n2 {data} 27 90 n1 n2 1B 5A n1 n2 {data} {data} Selects horizontal ratio (n=0.25 to 3 step 0.01) Selects vertical ratio (n-0.25 to 3 step 0.01) Execute saved card data ESC CR ! n H ESC CR ! n V ESC CR ! n E 27 13 33 n 72 27 13 33 n 86 27 13 33 n 69 1B 0D 21 n 48 1B 0D 21 n 56 1B 0D 21 n 45 Appendix-63