Brother International MFC-1870MC Users Manual - English - Page 23
Connections, to VOICE:EXT..
View all Brother International MFC-1870MC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
15 I N S T A L L A T I O N Do not connect a TAD elsewhere on the same phone line-your FAX/MFC and TAD will both try to control the line. Connections The external TAD must be plugged into the left side of the FAX/MFC, into the jack labeled EXT. Your FAX/MFC cannot work properly if you plug the TAD into a wall jack. 1 Plug the telephone line cord from the wall jack into the left side of the FAX/ MFC, in the jack labeled LINE. 2 Plug the telephone line cord from your TAD into the left side of the FAX/MFC, in the jack labeled EXT. (Make sure this cord is connected to the TAD at the TAD's telephone line jack, and not its telephone set jack.) 3 Set your external TAD to 4 rings or less. (The FAX/MFC's Ring Delay setting does not apply). 4 Record the outgoing message (see below). 5 Set the TAD to answer calls. 6 Set Message Storage ( Function , 8 , 1 ) to VOICE:EXT.. 7 Set the Answer Mode to MC:MSG CTR.