Brother International MFC 795CW Users Manual - English - Page 56
Dual Access (Black & White only), Real Time Transmission, Stop/Exit, Black Start - memory full clear
UPC - 012502623311
View all Brother International MFC 795CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Chapter 5 Dual Access (Black & White only) 5 You can dial a number and start scanning the fax into memory-even when the machine is sending from memory, receiving faxes or printing PC data. The LCD shows the new job number and available memory. The number of pages you can scan into the memory will vary depending on the data that is printed on them. Note If the Out of Memory message appears while scanning a document, press Stop/Exit to cancel or Black Start to send the scanned pages. Real Time Transmission 5 When you are sending a fax, the machine will scan the document into the memory before sending. Then, as soon as the telephone line is free, the machine will start dialing and sending it. Sometimes, you may want to send an important document immediately, without waiting for memory transmission. You can turn on Real Time TX. a Press (Fax). b Press d or c to display Real Time TX. c Press Real Time TX. d Press On. Note • If the memory is full and you are sending a black and white fax from the ADF, the machine will send the document in real time (even if Real Time TX is set to Off). Faxes from the scanner glass cannot be sent until you clear some of the memory. • In real time transmission, the automatic redial feature does not work when you are using the scanner glass. 40