Brother International MFC 795CW Users Manual - English - Page 75
Remote Fax commands, Play and Record OGM in Memory
UPC - 012502623311
View all Brother International MFC 795CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Receiving a Fax Remote Fax commands 6 Follow the commands below to access features when you are away from the machine. When you call the machine and enter your remote access code (3 digits followed by l), the system will give two short beeps and you must enter a remote command. Remote commands Operation details 91 Playing Voice messages After one long beep, the machine plays the ICM. 1 Repeat or Skip Backward Press 1 while listening to an ICM to repeat it. If you press 1 before a message, you will hear the previous message. 2 Skip Forward While playing the ICM, you can skip to the next message. 9 STOP Playing Stop playing the ICM. 93 Erase all ICM If you hear one long beep, the erase is accepted. If you hear three short beeps, you cannot erase the messages because all voice messages have not been played, or there are no voice messages to erase. 6 *This code erases all recorded messages, not one at a time. 94 Play and Record OGM in Memory 1 Play 1 Msg Ctr OGM 2 F/T OGM The machine plays the selected OGM. You can stop playing the OGM by pressing 9. 2 Record 1 Msg Ctr OGM 2 F/T OGM After one long beep, you can record the selected OGM. You will hear the message played once. You can stop recording the message by pressing 9. 95 Change the Fax Forwarding, Paging or Fax Storage settings 1 OFF You can choose Off after you have retrieved or erased all your messages. 2 Fax Forwarding 3 Paging 4 Fax Forwarding number 6 Fax Storage One long beep means the change is accepted. If you hear three short beeps, you cannot change it because something has not been set up (for example, a Fax Forwarding or Paging number has not been registered). You can register your Fax Forwarding number by entering 4. (See Changing your Fax Forwarding number on page 60.) Once you have registered the number, Fax Forwarding will work. 96 Retrieve a fax 2 Retrieve all faxes Enter the number of a remote fax machine to receive stored fax messages. (See Retrieving fax messages on page 60.) 3 Erase faxes from the memory If you hear one long beep, fax messages have been erased from the memory. 97 Check the receiving status 1 Fax 2 Voice You can check whether your machine has received any faxes or voice messages. If yes, you will hear one long beep. If no, you will hear three short beeps. 59