Brother International MFC 795CW Users Manual - English - Page 58
Setting your changes as the new default, Restoring all fax settings to the factory settings
UPC - 012502623311
View all Brother International MFC 795CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Chapter 5 g Do one of the following: To cancel, press Yes. If you want to cancel another job go to step f. To exit without canceling, press No. h When you have finished, press Stop/Exit. Setting your changes as the new default 5 You can save the fax settings for Fax Resolution, Contrast, Real Time TX, Glass ScanSize and Preview you use most often by setting them as default. These settings will stay until you change them again. a Press (Fax). b Press d or c to choose the setting you want to change, and then press the new option. Repeat this step for each setting you want to change. c After changing the last setting, press d or c to display Set New Default. d Press Set New Default. e Press Yes. f Press Stop/Exit. 42 Restoring all fax settings to the factory settings 5 You can restore all the fax settings you have changed to the factory settings. These settings will stay until you change them again. a Press (Fax). b Press d or c to display Factory Reset. c Press Factory Reset. d Press Yes. e Press Stop/Exit. Sending a fax manually 5 Manual transmission lets you hear the dialing, ringing and fax-receiving tones while sending a fax. Note If you are sending a multiple page fax, use the ADF. a Press (Fax). b Load your document. c To listen for a dial tone, press Speaker Phone on the machine or pick up the handset. d Dial the fax number using the dial pad. You can also enter the fax number on the LCD by pressing Speed Dial and Send a fax. (For details, see How to Dial on page 73.) e When you hear the fax tone, press Black Start or Color Start. If you are sending from the scanner glass, press Send on the LCD to send the fax. f If you pick up the handset, replace it.