Brother International MFC-J6510DW Network Users Manual - English - Page 21

Configuring your machine for a wireless network Configuring your machine when the SSID is not broadcast 3 a Before configuring your machine we recommend you write down your wireless network settings. You will need this information before you continue with the configuration. Check and record the current wireless network settings. SSID (Network Name): 3 Communication Mode Infrastructure Authentication method Open system Shared key WPA/WPA2-PSK Ad-hoc Open system 1 TKIP is supported for WPA-PSK only. Encryption mode WEP NONE WEP AES TKIP 1 WEP NONE For example: SSID (Network Name): HELLO Network key - - Communication Mode Infrastructure Authentication method Encryption mode WPA2-PSK AES Network key 12345678 Note If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine supports the use of the first WEP key only. b Press Menu. c Press a or b to choose Network. Press OK. d Press a or b to choose WLAN. Press OK. e Press a or b to choose Setup Wizard. Press OK. f When Network I/F switched to Wireless. is displayed, press OK to accept. This will start the wireless setup wizard. To cancel, press Stop/Exit. 16