Home » Brother International Manuals » Multifunction Devices » Brother International MFC-J6510DW » Manual Viewer

Brother International MFC-J6510DW Network Users Manual - English - Page 36

Restoring the network settings to factory default - factory reset

UPC - 012502626626

View all Brother International MFC-J6510DW manuals

Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

Control panel setup Restoring the network settings to factory default 5 You can reset the print server back to its default factory settings (resetting all information such as the password and IP address information). Note • This function restores all wired and wireless network settings to the factory default. • You can also reset the print server back to its factory default settings using the BRAdmin applications or Web Based Management. (For more information, see Other Management Utilities on page 7.) a Press Menu. b Press a or b to choose Network. 5 Press OK. c Press a or b to choose Network Reset. Press OK. d Press 1 for Reset. e Press 1 for Reboot. f The machine will re-start. 31

Section	Page
NETWORK USER’S GUIDE	1
Definitions of notes	2
Compilation and publication notice	2
IMPORTANT NOTE	2
Table of Contents	3
1 Introduction	6
Network features	6
Other Network features	8
Internet fax (Available as a download)	8
Security	8
Secure Function Lock 2.0	8
2 Changing your machine’s network settings	9
How to change your machine’s network settings (IP address, Subnet mask and Gateway)	9
Using the control panel	9
Using BRAdmin Light utility	9
Installing BRAdmin Light	9
Setting the IP address, Subnet Mask and Gateway using BRAdmin Light	10
Other Management Utilities	12
Web Based Management (web browser)	12
BRAdmin Professional 3 utility (Windows®)	12
Web BRAdmin (Windows®)	12
3 Configuring your machine for a wireless network	13
Overview	13
Step by step chart for wireless network configuration	14
For Infrastructure mode	14
For Ad-hoc mode	15
Confirm your network environment	16
Connected to a computer with a WLAN access point/router in the network (Infrastructure mode)	16
Connected to a wireless capable computer without a WLAN access point/router in the network (Ad-hoc mode)	16
Confirm your wireless network setup method	17
Configuration using the WPS/AOSS™ control panel menu (Infrastructure mode only) (Recommended)	17
Configuration using the machine’s control panel Setup Wizard to configure your wireless network machine	17
Configuration using the Brother installer application on the installation CD-ROM to configure your wireless network machine	18
Configuration using the Automatic Wireless mode	18
Configuration temporarily using a USB or network cable	18
Configuration using the PIN Method of Wi-Fi Protected Setup (Infrastructure mode only)	19
Configuring your machine for a wireless network (for Infrastructure mode and Ad-hoc mode)	20
Using WPS or AOSS™ from the control panel menu to configure your machine for a wireless network	20
Using the Setup Wizard from the control panel	20
Configuring your machine when the SSID is not broadcast	21
Using the Brother automatic installer application on the installation CD-ROM to configure your machine for a wireless network	23
Using the PIN Method of Wi-Fi Protected Setup	23
4 Wireless configuration using the Brother installer application	25
Before configuring the wireless settings	25
Configure the wireless settings	26
5 Control panel setup	29
Network menu	29
TCP/IP	29
BOOT Method	29
IP Address	30
Subnet Mask	30
Gateway	30
Node Name	30
WINS Config	30
WINS Server	30
DNS Server	31
APIPA	31
IPv6	31
Setup Wizard	31
WPS/AOSS™	31
WPS w/PIN Code	32
WLAN Status	32
Status	32
Signal	32
SSID	32
Comm.Mode	32
Ethernet	32
MAC Address	32
E-mail / IFAX (Available when IFAX is downloaded)	32
Mail Address	33
Setup Server	33
Setup Mail RX	33
Setup Mail TX	34
Setup Relay	34
Time Zone	35
Windows® Time Zone setting	35
Network I/F	35
Restoring the network settings to factory default	36
Printing the Network Configuration List	37
Printing the WLAN Report	38
Function table and default factory settings	39
6 Web Based Management	42
Overview	42
How to configure the machine settings using Web Based Management (web browser)	43
Secure Function Lock 2.0	45
How to configure the Secure Function Lock 2.0 settings using Web Based Management (web browser)	45
Basic configuration	45
Scanning when using Secure Function Lock 2.0	46
Setting up public mode	46
Restricting PC print by PC user login name	46
Other features	46
Changing the Scan to FTP configuration using a web browser	48
Changing the Scan to Network configuration using a web browser	49
7 Internet fax	50
Internet fax Overview	50
Important information on Internet fax	51
How to Internet fax	52
Sending an Internet fax	52
Before sending an Internet fax	52
How to send an Internet fax	52
Receiving E-mail or Internet fax	53
Before receiving an Internet fax	53
How to receive an Internet fax	53
Receiving an Internet fax to your computer	53
Additional Internet Fax options	54
Forwarding received E-mail and fax messages	54
Relay broadcasting	54
Before relaying broadcast	54
Relay broadcast from a machine	54
Sending to multiple phone numbers:	55
Relay broadcast from a computer	56
TX Verification Mail	56
Setup Mail TX	57
Setup Mail RX	57
Error mail	57
8 Security features	58
Overview	58
Sending an E-mail securely	59
Configuration using Web Based Management (web browser)	59
Sending an E-mail with user authentication	59
Secure Management using BRAdmin Professional 3 (Windows®)	61
To use the BRAdmin Professional 3 utility securely, you need to follow the points below	61
9 Troubleshooting	62
Overview	62
Appendix A	69
Supported protocols and security features	69