Brother International XL-3010 Users Manual - English - Page 28
Changing Sewing Direction, Finishing Sewing - how to thread
View all Brother International XL-3010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Changing Sewing Direction 1. Stop the machine at the point where you wish to change directions with the needle still in the fabric. 2. Raise the presser foot and turn the fabric to line up its new direction using the needle as a turning point. 3. Lower the presser foot and start sewing in the new direction. Cambio de sentido de costura 1. Pare la máquina en donde quiera cambiar de dirección, con la aguja picada en el tejido. 2. Levante el prensatelas y gire el tejido en la dirección que debe seguir, usando la aguja como placa giratoria. 3. Baje el prensatelas y empiece a coser en la nueva dirección tal como ilustrado. STRAIGHT AND ZIGZAG STITCHING PUNTADAS RECTAS Y ZIGZAG Finishing Sewing Reverse stitching is used to lock the threads at the end of the seam or wherever reinforcement is needed. 1. Stitch to the end of the seam and stop. 2. Push the Reverse Sewing Button and lightly touch the foot controller to stitch backwards for 1 cm (3/8") from the end of the fabric. Para terminar las costuras La puntada de retroceso se usa para trabar los hilos al final de una costura o en cualquier punto donde sea necesario reforzar la costura. 1. Cosa hasta el final de la costura y pare. 2. Apriete el pulsador de retroceso y presione suavemente el pedal para coser hacia atrás hasta 1 cm (3/8") de la orilla del tejido. 234