Brother International XL-3010 Users Manual - English - Page 38
Buttonhole Fine, Adjustment
View all Brother International XL-3010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
SECURING THE STITCHING AND CUTTING THE BUTTONHOLE 1. To secure the stitching, turn the material 90 degrees counterclockwise and sew Straight Stitches (2) to the end of the front bar tack of the buttonhole. 2. Remove the material from the machine. It is recommended that pins be placed across both ends of the buttonhole as protection against cutting the stitches. 3. Cut an opening in the middle of the buttonhole with a seam ripper tool. Be careful not to cut through any stitches. Para completar las puntadas y cortar el ojal 1. Para asegurar las puntadas, gire el tejido a 90 grados en el sentido contrario al de las manecillas de un reloj y cosa unas puntadas rectas (No 2) hasta el final de la línea del remate de la parte delantera. 2. Retire el tejido de la máquina. Se recomienda colocar alfileres en ambos extremos del ojal para evitar el corte de las puntadas. 3. Corte una apertura en el medio del ojal con el cortador especial que sirve para abrir costuras. Tenga cuidado en no cortar ninguna puntada. BUTTONHOLE AND BUTTON SEWING OJALES Y COSTURA DE BOTONES Buttonhole Fine Adjustment If the stitching on the two sides of the buttonhole do not appear uniform, the following adjustments can be made. 1. Set the Stitch Length Dial at "F" and stitch the left side of the buttonhole on a scrap of fabric while observing how the material is fed. 2. If the left side of the buttonhole is too coarse or fine, adjust the feeding of the material with the Stitch Length Dial. Ajuste fino de los ojales Si las puntadas en ambos lados del ojal no parecen ser uniformes, se pueden hacer los siguientes ajustes. 1. Ponga el selector de largo de puntada en "F" y cosa la parte izquierda del ojal en un pedazo de tejido, observando como se alimenta el tejido. 2. Si la parte izquierda del ojal es demasiada gruesa o fina, ajuste la alimentación del tejido con el selector de largo de puntada. 334