Canon 1321B002AB User Manual - Page 15
Back View, Interfaces, CAUTION, See 2-4 Connecting the Scanner to the Computer, on p. 2
View all Canon 1321B002AB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Chapter 1 Before Using the Scanner ■ Back View Document Eject Tray 2 Open this tray to use the scanner in a straight path configuration. (See p. 3-3.) ■ Interfaces (See "2-4 Connecting the Scanner to the Computer," on p. 211.) DIP Switches Set the SCSI ID. SCSI Connector Connect to a 50-pin half-pitch (pin type) SCSI cable. ON 2 1 (Ventilation Holes) USB Connector Connect the provided USB cable or a USB cable that supports Hi-Speed USB 2.0. Power Connector CAUTION • Do not block the ventilation openings. Doing so could cause the scanner to overheat, creating a risk of fire. • Do not connect both a USB cable and a SCSI cable at the same time. Doing so may cause a malfunction. 1-8
Chapter 1
Before Using the Scanner
1-8
■
Back View
■
Interfaces
(See “2-4 Connecting the Scanner to the Computer,” on p. 2-
11.)
CAUTION
•
Do not block the ventilation openings. Doing so could cause the scanner to overheat,
creating a risk of fire.
•
Do not connect both a USB cable and a SCSI cable at the same time. Doing so may
cause a malfunction.
Document Eject Tray 2
Open this tray to use the
scanner in a straight path
configuration.
(See p. 3-3.)
1
ON
2
USB Connector
Connect the provided USB
cable or a USB cable that
supports Hi-Speed USB 2.0.
DIP Switches
Set the SCSI ID.
SCSI Connector
Connect to a 50-pin half-pitch (pin type) SCSI cable.
(Ventilation Holes)
Power Connector