Canon 1321B002AB User Manual - Page 26

Connecting the Scanner to the Computer, Using a USB Connection, CAUTION

Get Canon 1321B002AB PDF manuals and user guides View all Canon 1321B002AB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Chapter 2 Setup 2-4 Connecting the Scanner to the Computer There are two methods for connecting the DR-4010C scanner to a computer: USB connection, which makes use of a standard USB port on the computer, and SCSI connection, which makes use of a SCSI card installed in an expansion slot of the computer. Select the method that is suitable for your computer environment. SCSI ID DIP Switches Power Connector USB Connector SCSI Connector (half-pitch 50-pin, pin-type) CAUTION Do not connect a USB cable and SCSI cable at the same time. Using a USB Connection 1 Verify that the power switch of the scanner is OFF. If the power switch is in the ON position, push the switch to set it to OFF. Power switch OFF position ON position 2 Plug the supplied power cord into the power connector on the back of the scanner. a 2-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
Chapter 2
Setup
2-11
2-4
Connecting the Scanner to the Computer
There are two methods for connecting the DR-4010C scanner to a computer: USB connection,
which makes use of a standard USB port on the computer, and SCSI connection, which makes use
of a SCSI card installed in an expansion slot of the computer. Select the method that is suitable for
your computer environment.
CAUTION
Do not connect a USB cable and SCSI cable at the same time.
Using a USB Connection
1
Verify that the power switch of the scanner is OFF.
If the power switch is in the ON position, push the switch to set it to OFF.
2
Plug the supplied power cord into the power connector on the back of the scanner.
a
SCSI ID DIP Switches
USB Connector
SCSI Connector
(half-pitch 50-pin, pin-type)
Power Connector
Power switch
OFF position
ON position