Canon 3624B002 User Manual

Canon 3624B002 Manual

Get Canon 3624B002 PDF manuals and user guides View all Canon 3624B002 manuals
Add to My Manuals
Save this manual to your list of manuals

Canon 3624B002 manual content summary:

  • Canon 3624B002 | User Manual - Page 1
    DR-9050C/DR-7550C User Manual DR-6050C Please read this manual before using the scanner. After you finish reading this manual, keep it in a safe place for future reference.
  • Canon 3624B002 | User Manual - Page 2
    Document Scanner: - DR-6050C: Model M11070 - DR-7550C: Model M11069 - DR-9050C: Model M11068 This device complies with Part on, the user is encouraged manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon products
  • Canon 3624B002 | User Manual - Page 3
    each sales region of the Document Scanner. DR-6050C: Model M11070 DR-7550C: Model M11069 DR-9050C: Model M11068 Trademarks • Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also be trademarks or registered trademarks in other countries. • imageFORMULA
  • Canon 3624B002 | User Manual - Page 4
    you for purchasing the Canon imageFORMULA DR-6050C/DR-7550C/DR-9050C Document Scanner. Please read this and the following manuals thoroughly before using the scanner to become acquainted with its capabilities and make the most of its many functions. After reading the manuals, store them in a safe
  • Canon 3624B002 | User Manual - Page 5
    Describes routine cleaning and roller replacement Chapter 6 Practical Examples Describes displayed messages and troubleshooting solutions Chapter 7 Appendix Provides a list of specifications and support information ■ Software Chapter 8 ISIS/TWAIN Driver Settings Describes the settings for
  • Canon 3624B002 | User Manual - Page 6
    User Manual Hardware Please read this manual before using the scanner. After you finish reading this manual, keep it in a safe place for future reference.
  • Canon 3624B002 | User Manual - Page 7
    4-8 4. User Mode Functions 4-10 Chapter 5 Maintenance 1. Regular Maintenance 5-2 Cleaning the Scanner 5-2 Cleaning the Sensors 5-2 Cleaning the Scanning Glass and Rollers 5-3 Power Outlet 5-4 2. Replacing the Transport Rollers 5-5 Roller Replacement Cycle 5-5 Checking and Resetting the Page
  • Canon 3624B002 | User Manual - Page 8
    5-16 Imprinter Testing 5-17 Chapter 6 Practical Examples 1. Messages 6-2 Status Display 6-2 Error Messages 6-3 2. Troubleshooting 6-5 Trouble Categories 6-5 Problem and Solution 6-5 3. Uninstalling the Software 6-9 Uninstalling the ISIS/TWAIN Driver 6-9 Chapter 7 Appendix 1. Specifications
  • Canon 3624B002 | User Manual - Page 9
    Chapter 1 Before You Start Using the Scanner 1. Important Safety Instructions 1-2 Installation Location 1-2 Power 1-2 Moving the Scanner 1-3 Handling 1-3 Disposal 1-5 2. Features 1-6 3. Names and Functions of Parts 1-10 Front View, Feeder Inlet, and Eject Outlet ..........1-10 Rear View 1-
  • Canon 3624B002 | User Manual - Page 10
    Chapter 1 Before You Start Using the Scanner 1. Important Safety Instructions To ensure the safe operation of this scanner, be sure to read the safety warnings and precautions described below. Installation Location The performance of this scanner is affected by the environment in which it is
  • Canon 3624B002 | User Manual - Page 11
    If you have any questions regarding the power supply, contact your local authorized Canon dealer or service representative for further information. Moving the Scanner ● The scanner weights about 50 lbs (22.5 kg). To lift or move the scanner, always use two people, one on each side. Never attempt to
  • Canon 3624B002 | User Manual - Page 12
    products near the scanner. ■ When cleaning the scanner, turn the power switch OFF and disconnect the power plug from the power supply. ■ Clean the scanner , contact your local authorized Canon dealer or service representative to have the unit serviced. ■ Do not locate the scanner in a humid or dusty
  • Canon 3624B002 | User Manual - Page 13
    in personal injury. Be extra careful of neckties and long hair. If anything becomes caught in the scanner, immediately disconnect the power cord to stop the scanner. ■ Be careful when placing paper in the scanner and when removing jammed paper. It is possible to cut your hand on the edge of a sheet
  • Canon 3624B002 | User Manual - Page 14
    Freely Adjustable Document Guides The left and right document guides can be adjusted so that documents can be positioned to scan either the left or right side. (See "Adjusting the Document Guides" on p. 3-8.) ● User Mode The User Mode functions can be employed to set the scanner for practically any
  • Canon 3624B002 | User Manual - Page 15
    detects a double feed when a page of a different length is fed. Chapter 1 Before You Start Using the Scanner ● Prescan At the start of scanning, this function prescans the first page of a document and pauses so that you can use the first image to adjust the brightness and contrast before resuming
  • Canon 3624B002 | User Manual - Page 16
    Front and Back Images Reconstructed Image * Folio Scan supports up to A1-size (23.4" × 33.1" (594 × 841 mm)) documents when used together with the Long Document Mode. ● MultiStream The scanner supports MultiStream, which, depending on the software application, can create two images with different
  • Canon 3624B002 | User Manual - Page 17
    from the document page on Imprinter (Option) As an option, printing can be made on scanned documents. ● Barcode Detection (Option) Barcodes on documents can be detected by installing the optional barcode module. ● Patchcode Support (Option) By installing the optional patchcode decoder, patch code
  • Canon 3624B002 | User Manual - Page 18
    Start Using the Scanner 3. Names and Functions of Parts The names and functions of the DR-6050C/7550C/9050C parts are shown below. Front View, Feeder Inlet, and Eject Outlet a Upper Unit Open when cleaning the rollers or paper jams. (See p. 3-23.) b Imprinter Cover Open when replacing the ink
  • Canon 3624B002 | User Manual - Page 19
    supplied USB cable here. (See p. 2-6.) d SCSI Connector (50-pin half-pitch D-sub receptacle) Connect the SCSI cable here. (See p. 2-7.) e DIP Switches (SCSI ID) Selects the scanner's SCSI ID. (See p. 2-8.) CAUTION Do not block the ventilation holes. Doing so could cause the
  • Canon 3624B002 | User Manual - Page 20
    and job. e Menu Key Displays the user mode. (See p. 4-8.) f Job Key Selects jobs. (See p. 3-14.) g Count Only Key Feeds and counts the number of document pages. (See p. 4-4.) h Separation Off Key Raises the Document Feed Tray for the non-separating (manual) mode. (See p. 3-11.) i New File Key
  • Canon 3624B002 | User Manual - Page 21
    Procedures 2-2 2. Installation Requirements 2-3 3. Software Installation 2-4 About the Setup Menu 2-4 4. Connecting the Scanner to the Computer ....... 2-6 Interface Connector Locations 2-6 Connecting the Scanner to the Computer 2-6 5. Turning the Power ON (Scanner Recognition 2-9 About the
  • Canon 3624B002 | User Manual - Page 22
    you connect the scanner to the computer before installing the software, a wizard screen such as the one shown below will appear when you turn the scanner ON. In this case, click [Cancel] to close the wizard screen, and then turn the scanner OFF. • Windows 2000 • Windows XP • Windows Vista Chapter
  • Canon 3624B002 | User Manual - Page 23
    or later Hint Microsoft Windows Vista has 32- and 64-bit versions. ■ Computer Specifications: • CPU: driver provided by Microsoft. Contact your local authorized Canon specifications, the scanning speed may vary, depending on the scan settings. • The ISIS/TWAIN Drivers provided with the scanner
  • Canon 3624B002 | User Manual - Page 24
    account with Administrator privileges. • When using Windows Vista, the "User Account Control" dialog box may appear. In this case, enter your login user password for Administrator privileges, and click [OK]. Hint See the Easy Start Guide for instructions on using the typical installation procedure
  • Canon 3624B002 | User Manual - Page 25
    ■ The Read Manual Screen From this screen you can select one of the supplied electronic manuals to read: the Easy Start Guide (a printed copy is also supplied), the Reference Guide, the User Manual (this manual), or the CapturePerfect 3.0 Operation Guide. Chapter 2 Setup 2-5
  • Canon 3624B002 | User Manual - Page 26
    for the intended connection method. ■ Using a USB Connection 1. Connect the supplied power cord into the power connector on the back of the scanner. a 2. Connect the power cord into an AC outlet. b Power Connector a USB Connector b SCSI Connector (D-sub, 50-pin half-pitch) c DIP Switches for
  • Canon 3624B002 | User Manual - Page 27
    computer is turned OFF before connecting the SCSI cable. If the cable is connected while the computer is on, the scanner may not be properly recognized by the computer. 1. Shut down Windows and turn the computer's power OFF. 2. Connect the supplied power cord into the power connector on the back of
  • Canon 3624B002 | User Manual - Page 28
    using a daisy-chain configuration with other SCSI devices, set the DIP switches so that SCSI ID numbers are not duplicated in the system. DIP Switches Default Position (SCSI ID=2) • The scanner incorporates a SCSI terminator which is permanently set to ON. When using a daisy-chain configuration with
  • Canon 3624B002 | User Manual - Page 29
    connected properly. 2. Turn ON the scanner. 3. Turn ON the computer. 4. Log onto Windows as an Administrator. 5. Windows automatically recognizes the scanner and performs the device driver installation. • Windows 2000 Power Switch IMPORTANT • When connecting the scanner to the computer using a SCSI
  • Canon 3624B002 | User Manual - Page 30
    and click the [Device Manager] icon. • With Windows XP and Vista, a message appears when installation is finished. • Windows XP • Windows Vista • The scanner is installed in Device Manager under [Imaging devices] as [CANON DR-XXXX USB] or [CANON DR-XXXX SCSI]. (XXXX varies depending on the model
  • Canon 3624B002 | User Manual - Page 31
    the Power ON and OFF 3-2 About the Power Switch 3-2 2. Documents 3-3 Acceptable Documents 3-3 3. Document Feed and Eject Trays 3-6 Preparing the Document Feed Tray 3-6 Adjusting the Document Guides 3-8 Preparing the Document Eject Tray 3-10 4. Document Feeding Methods 3-11 Selecting the
  • Canon 3624B002 | User Manual - Page 32
    . • If you will not be using the scanner for an extended period, disconnect the power cord from the AC outlet for safety. Power Switch Hint In the User Mode, if the tray position is set to a height other than the lowest position, then the Document Feed Tray moves up and down when the
  • Canon 3624B002 | User Manual - Page 33
    have the same size, thickness, and weight. Scanning different types of paper at one time can cause the scanner to jam. • Always make sure that the ink on a document is dry before scanning it. Scanning documents with the ink still wet may soil the rollers or scanning glass, cause lines or smudges
  • Canon 3624B002 | User Manual - Page 34
    against the feeder inlet and scan by manual feeding. • To use the Long Document Mode, feed document pages manually, one after another. Document Feeder Capacity DR-6050C: Up to 300 sheets of good quality paper or up to 1.10" (28 mm) high (maximum) DR-7550C/9050C: Up to 500 sheets of good quality
  • Canon 3624B002 | User Manual - Page 35
    page manually when scanning long documents, press the [Separation Off] key on the control panel. The current setting is indicated by blinking square brackets [ ]. 5. Press the [ ] or [ ] key to select [ON] or [OFF], and press [Enter] to accept the selection. 6. Press the Stop key to exit the User
  • Canon 3624B002 | User Manual - Page 36
    the proper position for the documents to be loaded. The User Mode is activated. 2. Press the [ ] key five times to display Tray Position. (See p. 4-8.) 3. Confirm your settings. For the DR-6050C [0]: To load up to 300 sheets [1]: To load up to 100 sheets For the DR-7550C/9050C [0]: To load up to
  • Canon 3624B002 | User Manual - Page 37
    guides can also be locked independently for off-center loading. For details, see "Adjusting the Document Guides" (p. 3-8). ■ Document Feeder Tray Extension / Extension Wire Pull out the tray extension as needed for the length of your document. 7. Press the Stop key to exit the User Mode. 3-7
  • Canon 3624B002 | User Manual - Page 38
    at the left side of the feeder. 1. Spread the document guides all the way to the left and right. Hint Use the extension wire if the document extends beyond the edge of the document tray. Adjusting the Document Guides The document guides normally extend at equal distances from the left and right of
  • Canon 3624B002 | User Manual - Page 39
    4. Lock the right document guide (a), and unlock the left document guide (b). Chapter 3 Basic Operation ■ Resetting the Document Guides To reset the guides so that they are equidistant from the center, perform the following procedure to spread the guides to the left and right as far as they will go
  • Canon 3624B002 | User Manual - Page 40
    be adjusted to fit the width and length of your documents. ■ Document Guides Slide the document eject guides to fit the width of your documents. The eject position of the document can be checked by feeding a single sheet of the document in Count-Only Mode. (See "Count-Only Mode" on p. 4-4.) ■ Eject
  • Canon 3624B002 | User Manual - Page 41
    for transport by the feed roller, while the pickup roller is disabled. Selecting the Document Feeding Method Continuous Feeding is the default feeding method, but Manual Feeding can be enabled by selecting Manual Feeding as the Feeding Option for the ISIS/TWAIN driver, or by pressing the Separation
  • Canon 3624B002 | User Manual - Page 42
    Retard Roller IMPORTANT When the Continuous Manual Feeding Mode is set to ON from the User Mode, make sure to disable it (set to OFF) when finished scanning. Otherwise, normal continuous feeding will be disabled the next time someone uses the scanner. Hint For Manual Feeding, you must feed document
  • Canon 3624B002 | User Manual - Page 43
    4. Press [Enter]. Enter Key The current setting is indicated by blinking square brackets [ ]. 5. Press the [ ] or [ ] key to select [ON] or [OFF], and press [Enter] to accept the selection. 6. Press the Stop key to exit the User Mode. Chapter 3 Basic Operation 3-13
  • Canon 3624B002 | User Manual - Page 44
    the CapturePerfect 3.0 software included with the scanner, or directly from the control panel of the DR-6050C/7550C/9050C, using the Job Tool is a TWAIN-compliant application that is installed along with the ISIS/TWAIN driver. See Chapter 9 "Job Registration Tool Settings" for details. ■ Executing
  • Canon 3624B002 | User Manual - Page 45
    -compatible application developed for Canon document scanners. CapturePerfect 3.0 includes the following modes. Select the desired scan mode from the Scan menu to perform scanning. For more information on CapturePerfect 3.0, refer to the CapturePerfect 3.0 Operation Guide. Chapter 3 Basic Operation
  • Canon 3624B002 | User Manual - Page 46
    1. From the Windows task bar, click documents. The procedure for using the Scan Batch to File function is described here as an example. For details, refer to the CapturePerfect 3.0 Operation Guide. CapturePerfect 3.0 starts. 2. From the [Scan] menu, select [Select Scanner]. The [Select Scanner
  • Canon 3624B002 | User Manual - Page 47
    are using) Chapter 3 Basic Operation The [Scan Batch to File Setting] dialog box opens. IMPORTANT If [CANON DR-XXXX] is not displayed in the list of scanners, you must re-install the ISIS/TWAIN driver. 4. Select the default page size and click [OK]. IMPORTANT If you select [Default] in the ISIS
  • Canon 3624B002 | User Manual - Page 48
    Batch to File Setting] dialog box, refer to the CapturePerfect 3.0 Operation Guide. 11. Place your document and click [Save] to start scanning. • If the [Manual Feeding] Feed Option is enabled, the Separation Off key is lit and the Document Feed Tray is raised. You must insert one page at a time
  • Canon 3624B002 | User Manual - Page 49
    Feed Option is enabled, the Start key lamp is lit. You must load a document and press the Start key to scan. Pressing the Stop key causes the Continue 12. When the [Continue Scanning] dialog box appears, verify that a document is loaded, and click either [Continue Scanning] or [Stop Scanning].
  • Canon 3624B002 | User Manual - Page 50
    DR-6050C/7550C/9050C supports Automatic File Separation by detecting patchcode sheets inserted within a document driver is installed. • Patchcode sheets must be printed in their original size. The scanner file with an application that supports CapturePerfect 3.0 or the PDF file format, and print the
  • Canon 3624B002 | User Manual - Page 51
    want to save as a separate file before placing the documents on the scanner. Insert patchcode sheets in front of the documents you want to save as separate files. Chapter 3 Basic Operation 3. On the [Other] tab of the ISIS driver properties, select [Patchcode] from the Batch Separation drop-down
  • Canon 3624B002 | User Manual - Page 52
    size as the pattern on the original. • Be careful to keep patchcode sheets clean. If a patchcode sheet has been folded or becomes creased, reprint or replace the sheet. 0.2" (5 mm) 3.9" (100 mm) Chapter 3 Basic Operation 3-22
  • Canon 3624B002 | User Manual - Page 53
    during scanning, a paper jam message appears on the PC and on the scanner's display panel. Use the following procedure to clear the paper jam. CAUTION displayed error code indicates the location of the paper jam. For details, see "Error Messages" on p. 6-3. 1. Remove any documents that remain
  • Canon 3624B002 | User Manual - Page 54
    When the Rapid Recovery System is enabled in the ISIS/ TWAIN driver settings, the following message appears on the display panel after you remove the jammed paper. Chapter 3 Basic Operation Return the jammed document page to the top of the document stack yet to be scanned, and press the Start key
  • Canon 3624B002 | User Manual - Page 55
    messages appear according to the Rapid Recovery System setting in the ISIS/TWAIN driver. (See "[Rapid Recovery System] Check Box" on p. 8-18.) scanning. [RETRY]: The display panel appears as below. Return the double-fed document pages to the tray and press the Start key. • When the Rapid Recovery
  • Canon 3624B002 | User Manual - Page 56
    Chapter 4 Other Functions 1. Other Functions and Settings 4-2 2. Function Description 4-4 3. User Mode 4-8 User Mode Operating Procedure 4-8 4. User Mode Functions 4-10
  • Canon 3624B002 | User Manual - Page 57
    1. Other Functions and Settings The following DR-6050C/7550C/9050C functions are grouped together as Other Functions. For details, refer to the indicated pages. SCSI Speed USB Short Packet Imprinter (Optional) Imprinter Test Counter (Total Counter) Count (Roller Counter) Count-Only Mode Display
  • Canon 3624B002 | User Manual - Page 58
    follows: Panel Operation: The operation or setting is performed using the control panel keys. User Mode: The scanner function setting is made as a User Mode selection. ISIS/TWAIN: The function is an ISIS/TWAIN driver scanning setting. • The page count for the Verify Scan operation is entered using
  • Canon 3624B002 | User Manual - Page 59
    Function Description The Other Functions are described below. See "User Mode" on p. 4-8, for descriptions of the functions set from the User Mode. ■ Count-Only Mode Counts the number of loaded document sheets by simply feeding them through the scanner. Hint The Count-Only mode is executed by the
  • Canon 3624B002 | User Manual - Page 60
    the specified count ■ Double-Feed Detection The scanner can detect double feeds. Two detection methods are used: comparison of document lengths, and ultrasonic detection of spacing between documents, which is set in the ISIS/TWAIN driver. Chapter 4 Other Functions IMPORTANT • The message that
  • Canon 3624B002 | User Manual - Page 61
    the Document Guides" on p. 3-8.) Hint • Staple detection is controlled in the ISIS/TWAIN driver, and the detection level can be set in the User Mode. the four corners of a document has been stapled. IMPORTANT • Folio scanning requires that you feed each page manually (The Separation Off key
  • Canon 3624B002 | User Manual - Page 62
    performed by setting the scanning side to [Folio] in the ISIS/TWAIN driver. (See p. 8-9.) ■ Imprinter (Optional) An imprinter that prints on scanned documents is available as an option. For details, contact your dealer or service representative. Hint • The text to print and the printing position can
  • Canon 3624B002 | User Manual - Page 63
    with the capability to change certain scanner functions. User Mode Operating Procedure User Mode operations are controlled by the following procedure. Hint Operating procedures differ according to User Mode function. For details, refer to the indicated pages. 1. Press the Menu key on the control
  • Canon 3624B002 | User Manual - Page 64
    3. Press [Enter]. Enter Key The current setting is indicated by blinking square brackets [ ]. 4. Press the [ ] or [ ] key to select [ON2], [ON1] or [OFF], and press [Enter] to accept the selection. 5. Press the [Stop] key to exit the User Mode. Chapter 4 Other Functions 4-9
  • Canon 3624B002 | User Manual - Page 65
    functions are available in the User Mode. ■ Buzzer (Beeper) Control Setting Chapter 4 Other Functions ■ Staple Detection Level Setting The beeper ("buzzer") sounds when you press the control panel keys and when a scanning error occurs. ON2: The beeper sounds when a scanner error occurs, and when
  • Canon 3624B002 | User Manual - Page 66
    sheet at a time by the operator. (See "Continuous Manual Feeding Mode" on p. 3-12.) ON: The pickup roller is disabled. OFF: Documents are fed by the pickup roller. ■ Stand-by Mode Setting Selects the amount of time (240, 60 or 10 minutes) from when the scanner is last used to when the Stand-by mode
  • Canon 3624B002 | User Manual - Page 67
    fed by the scanner. ■ Roller Counter Displays the number of document pages fed since roller installation or replacement (pickup, feed, and retard rollers). Make sure to reset this counter when replacing the rollers. (See "Checking and Resetting the Page Counter" on p. 5-5.) ■ Imprinter Test When the
  • Canon 3624B002 | User Manual - Page 68
    Cleaning the Scanner 5-2 Cleaning the Sensors 5-2 Cleaning the Scanning Glass and Rollers 5-3 Power Outlet 5-4 2. Replacing the Transport Rollers 5-5 Roller Replacement Cycle 5-5 Checking and Resetting the Page Counter...........5-5 Removing and Reinstalling the Rollers 5-7 3. Imprinter Ink
  • Canon 3624B002 | User Manual - Page 69
    . Wring out the cloth thoroughly, and use a clean dry cloth to wipe the scanner dry. ■ Cleaning the Document Feed Inlet and Transport Path Dust or paper particles in the document feed inlet or inside the scanner can cause spots to appear in scanned images. Use compressed air to periodically clean
  • Canon 3624B002 | User Manual - Page 70
    you find a scratch on the scanning glass, contact your local authorized Canon dealer or service representative to have the glass replaced. 1. Turn the power switch off, and disconnect the power plug from the power outlet. 2. Close the document eject tray extension if it is open. Open/Close Button
  • Canon 3624B002 | User Manual - Page 71
    wrung-out cloth. IMPORTANT If paper jams or double feeds occur frequently even after cleaning the rollers, the probable cause is the roller friction. If this happens, replace the rollers. Contact your service representative. Power Outlet If you leave the power plug connected to the power outlet for
  • Canon 3624B002 | User Manual - Page 72
    Replacement Kit The Roller Replacement Kit consists of replacement pickup, feed, and retard rollers. For details, contact your local authorized Canon dealer or service representative. Product Name: Roller Replacement Kit Product Code: 4009B001 Pickup Roller IMPORTANT • When the roller replacement
  • Canon 3624B002 | User Manual - Page 73
    activated. Menu Key 4. Press the [ ] key to select [RESET], and press [Enter]. The counter is reset to zero. 5. Press the [Stop] key to exit the User Mode. 2. Press the [ ] key twice to display [Roller Counter]. 3. Check the number of pages fed by the rollers, and press [Enter]. Enter Key 5-6
  • Canon 3624B002 | User Manual - Page 74
    procedure shown below to remove and reinstall the rollers when you need to clean or replace the Pickup, Feed, or Retard Rollers. CAUTION • Turn OFF the power switch, and disconnect the power plug from the power outlet when you remove or reinstall the rollers. Leaving the power turned ON may result
  • Canon 3624B002 | User Manual - Page 75
    down on both sides of the upper unit to ensure that it is securely closed (b). IMPORTANT Install the Pickup Roller so that side with the gear is on the left. Gear 6. Close the roller cover. Check that it makes a latching sound and that it is securely returned to its original position. ■ Removing
  • Canon 3624B002 | User Manual - Page 76
    the feed roller. Chapter 5 Maintenance 3. Pull the roller lock lever down. 6. Place the new feed roller on the pin. 4. Slide the feed roller to the right, and then pull them towards you. 7. Put the feed roller in place (a), and align the notch in the roller's axle with the shaft on the scanner
  • Canon 3624B002 | User Manual - Page 77
    5 Maintenance 10. Gently lower the upper unit (a). Press down on both sides of the upper unit to ensure that it is securely closed (b). 9. Close the roller cover. Check that it makes a latching sound and that it is securely returned to its original position. ■ Removing and Reinstalling the Retard
  • Canon 3624B002 | User Manual - Page 78
    it. Chapter 5 Maintenance 5. Set the retard roller into place in the scanner. 3. Push the roller lock lever up (a) and move it to the left (b) to unlock the roller. 6. Align the notches in the roller with the shaft pins in the scanner, then slide the roller lock lever in the direction indicated
  • Canon 3624B002 | User Manual - Page 79
    the roller cover in. Check that it makes a latching sound and that it is securely returned to its original position. CAUTION Make sure that the hook is completely latched and the roller cover is not loose. If the roller cover is loose, the Document Feed Tray will catch on it causing the scanner to
  • Canon 3624B002 | User Manual - Page 80
    . The imprinter cover unlocks and opens to the front. ■ Preparing an Ink Cartridge Use one of the following red, blue or green HP ink cartridges. For details, contact your local authorized Canon dealer or service representative. Product Name: Ink Cartridge (Blue) Product Code: 3693A002 Product Name
  • Canon 3624B002 | User Manual - Page 81
    eject tray. Chapter 5 Maintenance 6. Peel off the seal covering the nozzles of a new ink cartridge. Hint Perform the steps that follow with the imprinter cover fully open. 4. Pull the lock lever outward (a) to release the ink cartridge lock (b). CAUTION Peel off the seal covering the nozzles of
  • Canon 3624B002 | User Manual - Page 82
    Position" on p. 5-15.) Positioning Holes (15 Locations) Hint The imprinter cover will not close unless the carriage is correctly aligned with a positioning in. Specifying the Printing Position Manually specify the printing position in the horizontal direction of the document. To do this, move the
  • Canon 3624B002 | User Manual - Page 83
    edge of the lock lever with the desired printing position. Chapter 5 Maintenance Cleaning the Imprinter ■ Cleaning the Guide Plate Ink that collects on the guide plate inside the optional imprinter may stain the documents when they are scanned. Clean off the ink with water and a mild detergent on
  • Canon 3624B002 | User Manual - Page 84
    Key Imprinter Testing After replacing an ink cartridge or cleaning the print head, perform a test print to confirm proper printing. Test printing is performed by the "Imprinter Test" User Mode selection. IMPORTANT Before performing an Imprinter Test, load a sheet of paper into the Document Feed
  • Canon 3624B002 | User Manual - Page 85
    The Imprinter Test is enabled. 5. Press the [ ] key to select [OK], and press [Enter]. The test print is executed. IMPORTANT If no paper is loaded for test printing, the imprinter test finishes without printing. 6. Press the [Stop] key to exit the User Mode. Chapter 5 Maintenance 5-18
  • Canon 3624B002 | User Manual - Page 86
    Chapter 6 Practical Examples 1. Messages 6-2 Status Display 6-2 Error Messages 6-3 2. Troubleshooting 6-5 Trouble Categories 6-5 Problem and Solution 6-5 3. Uninstalling the Software 6-9 Uninstalling the ISIS/TWAIN Driver 6-9
  • Canon 3624B002 | User Manual - Page 87
    to use. ■ Scanning... Status: Scanning is in progress. Status: The scanner is busy processing. Wait until the display changes. ■ Verifying... Status: The scanner is verifying a scan. ■ Replace Roller Status: It is time to replace the rollers (the number of fed pages has exceeded 250,000). (See
  • Canon 3624B002 | User Manual - Page 88
    error. Solution: Turn the power OFF, and restart the scanner. If this does not solve the problem, make a note of the error code, and contact your Canon service representative. ■ Skew Detected Error Code: J018 Problem: A skewed document page contacted the wall of the transport path. Solution: Remove
  • Canon 3624B002 | User Manual - Page 89
    Feed Tray, and scan again. (See p. 3-24.) ■ Staple Detected Error Code: E021 Problem: An error has occurred with the Document Feed Tray. Solution: Turn the power OFF, and restart the scanner. ■ Count Mismatch Error Code: U001 Problem: The specified count has not yet been reached. Solution: Check
  • Canon 3624B002 | User Manual - Page 90
    It you cannot resolve a problem, contact your local authorized Canon dealer or your service representative. If this does not solve the problem, consider the following possible causes: Cause Solution The scanner does not support your USB interface. This product is not guaranteed to operate with
  • Canon 3624B002 | User Manual - Page 91
    and PC correctly connected with the proper cable? ✔ Is the scanner's power switch turned ON? If this does not solve the problem, consider the following possible causes: Cause Solution The ISIS/TWAIN driver and Job Registration Tool are not installed correctly. Uninstall and then reinstall the
  • Canon 3624B002 | User Manual - Page 92
    or service representative to purchase a Roller Replacement Kit, and replace the rollers (pickup, feed and retard rollers). (See "Replacing the Transport Rollers" on p. 5-5.) If this does not solve the problem, consider the following possible problems and causes: Problem Cause Solution Documents do
  • Canon 3624B002 | User Manual - Page 93
    after you clean the scanning glass and rollers, the scanning glass inside the scanner may be scratched. Contact your local authorized Canon dealer or service representative. Problem Cause Solution The scanned image is abnormal for certain documents. A detection function such as border removal is
  • Canon 3624B002 | User Manual - Page 94
    6 Practical Examples 3. Uninstalling the Software Some scanner malfunctions can be resolved by reinstalling the software. Before reinstalling the software, make sure to completely uninstall any previous installation first. Uninstalling the ISIS/TWAIN Driver The following procedure uses the ISIS
  • Canon 3624B002 | User Manual - Page 95
    4. Click the [Continue] button. The file-deletion confirmation screen appears. 5. Click [Yes] to proceed with uninstallation. 6. When uninstallation is finished, click [Finish]. Chapter 6 Practical Examples 6-10
  • Canon 3624B002 | User Manual - Page 96
    Chapter 7 Appendix 1. Specifications 7-2 Unit Specifications 7-2 Options 7-3 Consumables 7-3 External Dimensions 7-4 2. Option Specifications 7-5 Barcode Specifications 7-5 Imprinter Specifications 7-6 3. Index 7-7
  • Canon 3624B002 | User Manual - Page 97
    1. Specifications Unit Specifications Type Desktop sheet-fed scanner Scannable Document Requirements Width: 2" to 12.01" (50.8 mm to 305 mm) Length: 2.76" to 17.01" (70 mm to 432 mm) Weight: Continuous Feeding: 14 lb to 56 lb bond (52 g/m2 to 209 g/m2) (0.06 mm to 0.25 mm) Manual Feeding: 11 lb to
  • Canon 3624B002 | User Manual - Page 98
    of the page count. • For information about the roller replacement kit, contact your local authorized Canon dealer or service representative. Ink Cartridge: Blue (Product Code: 3693A002) This blue ink cartridge is used by the imprinter. (See "Replacing Ink Cartridges" on p. 5-13.) Ink Cartridge: Red
  • Canon 3624B002 | User Manual - Page 99
    External Dimensions Chapter 7 Appendix 18.90" (480 mm) 12.24" (311 mm) 15.35" (390 mm) 6.38 " (162 mm) 20.91" (531 mm) 23.62" (600 mm) 28.27" (718 mm) 7-4
  • Canon 3624B002 | User Manual - Page 100
    decoder. Barcode Specifications The following barcodes can be read by installing the optional barcode module. ■ Barcode Types Code No. of Digits Checksum EAN Codabar Code 39 ITF Code 128 UPC-A UPC-E 8 or 13 Modulus 10, Weight 3 3 to 32 (including Modulus 16, 7 DR Start/Stop characters
  • Canon 3624B002 | User Manual - Page 101
    At least 0.197" (5 mm) Conditions No background or overlapping barcodes Imprinter Specifications Printing Side Front Position Set in the ISIS/TWAIN driver (See p. 8-26) One of 15 positions Printing Content Set in the ISIS/TWAIN driver Imprinter Font Sizes (Dots) 12 × 12 (with no added space
  • Canon 3624B002 | User Manual - Page 102
    Scanning 4-6 H Handling 1-3 I Imprinter 4-7, 5-13 Imprinter Testing 5-17 Ink Cartridges 5-13 Installation Location 1-2 J Job Function 3-14 L Long Document Mode 3-4 M Maintenance 5-2 Manuals iii Messages 6-2 Moving the Scanner 1-3 O Other Functions 4-2 P Paper Jams 3-23 Part Names and
  • Canon 3624B002 | User Manual - Page 103
    Menu 2-4 custom installation 2-4 read manuals 2-5 typical installation 2-4 Skew Detection 4-6 Software installing 2-4 uninstalling 6-9 Staple Detection 4-6 Status Display 6-2 System Requirements 2-3 T Terminator 2-8 Troubleshooting 6-5 trouble categories 6-5 U Ultrasonic Double-Feed
  • Canon 3624B002 | User Manual - Page 104
    User Manual Software Please read this manual before using the scanner. After you finish reading this manual, keep it in a safe place for future reference.
  • Canon 3624B002 | User Manual - Page 105
    Table of Contents Chapter 8 ISIS/TWAIN Driver Settings 1. Before You Start Using the Scanner 8-2 2. ISIS/TWAIN Driver Settings Dialog Box ...........8-4 [Basic] Tab Sheet 8-6 [Brightness] Tab Sheet 8-14 [Image processing] Tab Sheet 8-16 [Others] Tab Sheet 8-18 [Imprinter/Addon] Tab Sheet 8-25
  • Canon 3624B002 | User Manual - Page 106
    Chapter 8 ISIS/TWAIN Driver Settings 1. Before You Start Using the Scanner 8-2 2. ISIS/TWAIN Driver Settings Dialog Box .......... 8-4 [Basic] Tab Sheet 8-6 [Brightness] Tab Sheet 8-14 [Image processing] Tab Sheet 8-16 [Others] Tab Sheet 8-18 [Imprinter/Addon] Tab Sheet 8-25
  • Canon 3624B002 | User Manual - Page 107
    if necessary for instructions on selecting the scanner. 1. Click the [Start] button, then select [All Programs] [CapturePerfect 3.0] - [CapturePerfect 3.0]. 2. Select [Select Scanner] from the [Scan] menu. CapturePerfect 3.0 starts. The [Select Scanner] dialog box opens. 3. Select [CANON DR-XXXX
  • Canon 3624B002 | User Manual - Page 108
    IMPORTANT • Clicking the [Default] in the ISIS Driver Properties dialog box, the setting is applied here. • For the TWAIN driver, the default paper size is LTR/A4 and cannot be changed. 5. Click [OK] to finish scanner selection. Chapter 8 ISIS/TWAIN Driver Settings 8-3
  • Canon 3624B002 | User Manual - Page 109
    3.0 or the Job Registration Tool, the following ISIS/TWAIN Driver Settings dialog box is displayed. The ISIS/TWAIN Driver Settings dialog box consists of the standard tab sheets [Basic], [Brightness], [Image processing], [Others], and [Imprinter/Addon]. See the description of each tab sheet for
  • Canon 3624B002 | User Manual - Page 110
    • [Basic] Tab Sheet (See p. 8-6) Chapter 8 ISIS/TWAIN Driver Settings • [Image processing] Tab Sheet (See p. 8-16) • [Brightness] Tab Sheet (See p. 8-14) • [Others] Tab Sheet (See p. 8-18) 8-5
  • Canon 3624B002 | User Manual - Page 111
    • [Imprinter/Addon] Tab Sheet (See p. 8-25) Chapter 8 ISIS/TWAIN Driver Settings [Basic] Tab Sheet You and closes the dialog box. Hint When you use an application program that scans from the TWAIN Driver Settings dialog box, [Scan] is displayed instead of [OK] to scan with the configured settings.
  • Canon 3624B002 | User Manual - Page 112
    DR-6050C/ 7550C/9050C ISIS Driver is utilized from a scanner setting or scanning dialog box belonging to an ISIScompatible application program. This tab sheet contains settings for the scanner functions that are not supported of user preferences that best suits your document. We recommend confirming
  • Canon 3624B002 | User Manual - Page 113
    . Hint • The background in tight spaces around text may not be removed. • Documents with low-contrast text can be made more readable by adjusting Contrast on the [Brightness] tab sheet. Chapter 8 ISIS/TWAIN Driver Settings • If the background is non-uniform, such as a pattern, the background
  • Canon 3624B002 | User Manual - Page 114
    and cannot be changed. (See "[Scan Options] (TWAIN driver only)" on p. 8-10.) • Selecting [Skip blank page] enables the [Setting] button, which opens the [BlankSkip Setting] dialog box. • Adjust the content density according to the document content. - When blank pages are not skipped, increase the
  • Canon 3624B002 | User Manual - Page 115
    Color], and the scanning side is [Duplex], the scanner may run out of memory and unable to scan the entire document. If this occurs, enable [Speed priority] and scan images of lower quality, or set the scanning side to [Simplex]. [Scan Options] (TWAIN driver only) Specify the operation when scanning
  • Canon 3624B002 | User Manual - Page 116
    is detected as black-and-white. Prescan Batch Separation (ISIS driver) JPEG Transfer Color drop-out Prevent Bleed Through / Remove Background document of light colors to be judged to be a black-and-white document. • Select [24-bit Color] if color documents are judged to be blackand-white documents
  • Canon 3624B002 | User Manual - Page 117
    Dialog Box In this dialog box you can define the area of the document page to scan on a selected page size, and register nonstandard document page sizes. The Scan Area dialog box is different for ISIS and TWAIN drivers: for the TWAIN driver, one of two dialog box types is displayed, depending on the
  • Canon 3624B002 | User Manual - Page 118
    in the [Basic] tab, the specified region is scanned offset. Area Window The size indicated for the Area panel corresponds to the page size setting 8-7). [Preview] Button (TWAIN driver only) Load the document and then click the [Preview] button to scan one document page and display its preview image
  • Canon 3624B002 | User Manual - Page 119
    of the [Basic] tab sheet. Chapter 8 ISIS/TWAIN Driver Settings The availability of brightness and contrast settings are as follows is [Black and White]. The brightness and contrast are adjusted according to the document. Brightness Adjusts the brightness of images to be scanned. Hint • If images
  • Canon 3624B002 | User Manual - Page 120
    ] Check Box If the brightness of the front and back of the document pages is different, select this check box to adjust only the brightness ] dialog box to adjust the gamma correction value. Chapter 8 ISIS/TWAIN Driver Settings Select Select the side and color for custom setting. Hint The color
  • Canon 3624B002 | User Manual - Page 121
    Chapter 8 ISIS/TWAIN Driver Settings Hint • Click any point in the Gamma Curve Graph to set that point as an output value. • Drag the mouse on the Gamma Curve
  • Canon 3624B002 | User Manual - Page 122
    rotated as follows, according to the orientation of loaded documents and the selected angle. Feeder Document: Face Up Document Orientation (Clockwise) 0 degrees 90 degrees 180 degrees 270 degrees Output Image [Reverse Image] Check Box (TWAIN driver only) Select this check box to output images
  • Canon 3624B002 | User Manual - Page 123
    you specify may not match those processed. Hint [Batch Separation] and [Patchcode Orientation] are functions for setting the ISIS driver, so they are not displayed for the TWAIN driver. ■ [Others] Tab Sheet Settings You can configure the following settings on the [Others] tab sheet. [Rapid Recovery
  • Canon 3624B002 | User Manual - Page 124
    is output from the scanner as an uncompressed or JPEG transfer, depending on instructions from the ISIS/TWAIN driver or application program. - a JPEG transfer. - Application program requests depend on the specifications of the particular program. Image Compression Ratio Adjusts the compression ratio
  • Canon 3624B002 | User Manual - Page 125
    ] is selected, the [Separation Off] key is lit and the Document Feed Tray is raised up. Start scanning with an application program and feed documents manually one at a time. The scanner detects a document and then scans it. Press the stop key to stop scanning. Hint If you press the [Separation
  • Canon 3624B002 | User Manual - Page 126
    option settings. [Standard Feeding] Feeding Option [Manual Feeding] Feeding Option Chapter 8 ISIS/TWAIN Driver Settings IMPORTANT • When [Patchcode] is the patchcode sheet. Hint Settings for various patchcode types and orientations on document pages are as follows. Patch T (File A) Patch II (File
  • Canon 3624B002 | User Manual - Page 127
    , and opens the [Barcode] dialog box for configuring settings for detecting barcodes in documents. IMPORTANT • For details on barcode specifications, see "Barcode Specifications" on p. 7-5. • If your application supports barcodes, barcode data that is detected can be read. When using CapturePerfect
  • Canon 3624B002 | User Manual - Page 128
    8 ISIS/TWAIN Driver Settings Hint • When specifying an area on the front side of documents, the x-offset is codes included in barcodes. Off: Ignore addon codes. On: Read addon codes. Auto: Detect and read addon codes automatically. Code 39 Detect Code 39 barcodes. [Enable] Detect and read Code
  • Canon 3624B002 | User Manual - Page 129
    the read checksum. [Output ST/SP] Output Start and Stop codes included in barcodes. [Method] Select the checksum calculation method. Code 128 Detect Code 128 barcodes. [Enable] Detect and read Code 128 barcodes. Chapter 8 ISIS/TWAIN Driver Settings ITF Detect ITF barcodes (including industrial 2 of
  • Canon 3624B002 | User Manual - Page 130
    Chapter 8 ISIS/TWAIN Driver Settings Check Boxes [Imprinter] Check Box Configure settings for imprinting any character string or counter on scanned documents. IMPORTANT Confirm that an ink cartridge is installed in the scanner before you use the imprinter function. "Check Imprinter" is displayed on
  • Canon 3624B002 | User Manual - Page 131
    /TWAIN Driver Settings [Single counter with number of characters] abbreviation: A dialog box appears in which to specify the number of characters of the single counter. A counter of the specified number of characters will be imprinted or added on scanned images. [Double counter with number of
  • Canon 3624B002 | User Manual - Page 132
    Chapter 8 ISIS/TWAIN Driver Settings Orientation Specify the orientation of characters to be imprinted or added. Hint Text orientation relative to the feeding direction is as follows. Orientation 0 degrees 90 degrees 180 degrees 270 degrees Print Imprinter Font Specify the font size of characters
  • Canon 3624B002 | User Manual - Page 133
    settings for add-on counters. Chapter 8 ISIS/TWAIN Driver Settings [Reset Value] Select the initial value when the counter is reset. [Reset Trigger] Select the trigger for resetting the counter. [New File] (ISIS driver only) The counter is reset when a batch separation occurs according to the Batch
  • Canon 3624B002 | User Manual - Page 134
    Chapter 9 Job Registration Tool Settings 1. Before Use 9-2 Job Function 9-2 Starting the Job Registration Tool 9-2 2. Job Registration Tool 9-3 3. Settings Dialog Boxes 9-5 [New/Editing] Dialog Box 9-5 [Admin] Dialog Box 9-8
  • Canon 3624B002 | User Manual - Page 135
    starts. Starting the Job Registration Tool Follow the procedure below to start the Job Registration Tool. 1. Click the [Start] button, and then click [All Programs] - [Canon DR-XXXX] - [Job Registration Tool]. (XXXX varies depending on the model you are using) 9-2
  • Canon 3624B002 | User Manual - Page 136
    Settings 2. Job Registration Tool The Job Registration Tool consists of the main window below and the [New/Editing] and [Admin] dialog boxes. For Selecting [Copy] displays the following dialog box. Specify the job number to copy to and job title, and click the [OK] button to copy the job to the
  • Canon 3624B002 | User Manual - Page 137
    Job List Displays the job numbers (01 to 99) and job titles. Job Information Displays the information for the job selected in the job list. [Close] Button Ends the Job Registration Tool. Chapter 9 Job Registration Tool Settings 9-4
  • Canon 3624B002 | User Manual - Page 138
    to open the [New/Editing] dialog box. Hint The [New/Editing] dialog box can also be opened in the following ways. • Right-click the job number you want to register and click [New/ Editing] in the submenu. ■ [New/Editing] Dialog Box Settings You can configure the following settings in the [New
  • Canon 3624B002 | User Manual - Page 139
    [Setting] button to configure scanner settings. Chapter 9 Job Registration Tool Settings File type Enter the file format for saved files. [Save to Pictures folder] Check Box Select this check box to save image files to the Pictures folder of the user logged in to Windows. Hint • The name displayed
  • Canon 3624B002 | User Manual - Page 140
    , and allows you to enter the user name and password required to access the PDF setting] dialog box. Chapter 9 Job Registration Tool Settings IMPORTANT The Compression rate setting is enabled when the scanner within document images are recognized as text and saved as appended text data in PDF (*pdf)
  • Canon 3624B002 | User Manual - Page 141
    to scan or while scanning, a warning message appears. Register Folder A warning size (capacity) can be specified for up to five folders, with the number (1 to 5) of the folder to be selected registered by [Register Folder]. [Display Warning Dialog] Check Box Select this check box when you want to
  • Canon 3624B002 | User Manual - Page 142
    the specified limit. • If a warning message appears, follow the instructions in the message to either continue scanning or change the save destination a different environment, such as occurs when multiple users log on to Windows or when multiple scanners are used. [Back Up] Button Writes a backup
  • Canon 3624B002 | User Manual - Page 143
    1. About Basic Condition Settings 10-2 Confirming the Basic Conditions for Scanning....10-2 2. Practical Examples 10-4 Scanning Documents of Unregistered Page Sizes 10-4 Specifying the Scanning Area 10-5 Configuring Scanner Settings According to the Purpose 10-6 Registering Your Settings 10-11
  • Canon 3624B002 | User Manual - Page 144
    setting items that are the minimum requirements when configuring the scanner settings. For details on settings, see Chapter 8 "ISIS/TWAIN Driver Settings Dialog Box". Confirming the Basic Conditions for Scanning When you scan a document, be sure to confirm the basic conditions [Mode], [Page Size
  • Canon 3624B002 | User Manual - Page 145
    ], the images of blank pages are deleted when the images are saved. • [Folio] recombines the front and back images scanned from both sides of the document into a single image. Chapter 10 Practical Examples 10-3
  • Canon 3624B002 | User Manual - Page 146
    8 "ISIS/TWAIN Driver Settings Dialog Box". Scanning Documents of Unregistered Page Sizes documents up to 118.11" (3 m) long. 1. In the User Mode, set [Long Document] of the scanner settings to [ON1] or [ON2]. (See "Long Document Mode Setting" on p. 3-4.) IMPORTANT • When scanning a long document
  • Canon 3624B002 | User Manual - Page 147
    Specifying the Scanning Area Configure the following settings when you want to specify the area of the document to scan. ■ Specifying an area Specify the area of the document to scan in the Scan Area dialog box. (See p. 8-12.) Hint Folio Scan supports up to A1-size (23.4" × 33.1" (594 × 841 mm
  • Canon 3624B002 | User Manual - Page 148
    driver, load the document you want to specify the area of and press the [Preview] button to scan the document and display the preview image in the Area panel. You can then specify the area from the displayed preview image. Configuring Scanner preview window. Scan the document you want to set
  • Canon 3624B002 | User Manual - Page 149
    ■ When you want to skip or enhance intermediate colors Select an intermediate color in [Color drop-out] on the [Image processing] tab sheet. Click the [Setting] button to display the Color Settings dialog box, and then you can specify the color range of the intermediate colors to ignore (drop out)
  • Canon 3624B002 | User Manual - Page 150
    on the [Brightness] tab sheet. (See p. 8-15.) ■ When you want to reduce the moire patterns that appear when color photos in magazines and other documents are scanned at low resolutions Setting [Moire Reduction] on the [Basic] tab sheet allows you to reduce the moire patterns that are generated when
  • Canon 3624B002 | User Manual - Page 151
    Detection] enables the [Setting] button, and you can configure settings for judging whether documents are color, and select the mode for when documents are judged to be black and white. (See p. 8-11.) Hint The ISIS driver does not have a function for reversing black and white. ■ When you want to
  • Canon 3624B002 | User Manual - Page 152
    with punch holes Select [Punch Hole Removal] on the [Image processing] tab sheet. The black spots from punch holes in documents are removed from scanned images. (See p. 8-17.) Chapter 10 Practical Examples Hint When [Text Orientation Recognition] is selected, image rotation is disabled. ■ When
  • Canon 3624B002 | User Manual - Page 153
    ] on the [Basic] tab sheet, the images of blank pages in the document are deleted. (See p. 8-9.) Chapter 10 Practical Examples Registering Your Settings You . ■ Registering scanning conditions Name and register the scanning conditions in [User Preference] on the [Basic] tab sheet. When you want to
  • Canon 3624B002 | User Manual - Page 154
    INC. 1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPAN CANON U.S.A. INC. ONE CANON PLAZA, LAKE SUCCESS, N.Y. 11042, U.S.A. CANON CANADA INC. 6390 DIXIE ROAD, MISSISSAUGA, ONTARIO L5T 1P7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59-61, P.O.BOX 2262, 1180 EG AMSTELVEEN, THE NETHERLANDS
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
Please read this manual before using the scanner.
After you finish reading this manual, keep it in a safe place for future reference.
User Manual
DR-9050C/DR-7550C
DR-6050C