Canon BJC 6100 User Guide - Page 20

Loading Paper (A4 size) This section describes the paper loading procedure using A4-size plain paper. Using Plain Paper 1 Raise the paper rest, and pull out the paper output tray and extension. Paper rest 2 Fan the stack to remove static cling and align the edges of the stack by tapping it on a flat surface. (Loading the paper without first fanning and aligning the edges could cause paper jams.) Paper output tray and extension Important To avoid touching the print surface, always handle media by the edges. Unclean or scratched print surfaces can adversely affect print quality. 3 Load the stack of paper as follows. Œ Align the stack with the right side of the auto sheet feeder and insert it into the auto sheet feeder. (You can print on either side of plain paper.) Load limit mark Print side Paper guide  Slide the paper guide to the left side of the stack until it is snug. Note Make sure that the top of the stack is not higher than the load limit mark. Maximum load capacity for plain paper is approximately 130 sheets (64 g/m2). 4 Make sure that the paper thickness lever is set to the Up position. 20