Canon BJC 6100 User Guide - Page 54
Print a nozzle check pattern to confirm the success of deep print head cleaning., p.49 or p.50
View all Canon BJC 6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Click the OK button. The POWER lamp starts flashing and print head cleaning begins. It takes approximately 1 to 2 minutes until the POWER lamp stops flashing and the deep print head cleaning operation is completed. Note For details on when to cleaning the print heads, refer to the User's Guide s Print a nozzle check pattern to confirm the success of deep print head cleaning. (¬ p.49 or p.50) If the cleaning had no effect, perform normal print head cleaning and deep print deep cleaning again. After cleaning the print head several times, if the nozzle check pattern is not satisfactory, the print heads may be worn out and the BJ Cartridge must be replaced. See "Replacing the BJ Cartridge". (¬ p.33) 54
54
Click the OK button.
The POWER lamp starts flashing and print head clean-
ing begins.
It takes approximately 1 to 2 minutes until
the
POWER lamp stops flashing and the deep print
head cleaning operation is completed.
For details on when to cleaning the print heads, refer to the User's Guide
■
Print a nozzle check pattern to confirm the success of deep print head cleaning.
(
➡
p.49 or p.50)
If the cleaning had no effect, perform normal print head cleaning and deep print deep cleaning
again.
After cleaning the print head several times, if the nozzle check pattern is not satisfactory,
the print heads may be worn out and the BJ Cartridge must be replaced.
See "Replacing the BJ
Cartridge". (
➡
p.33)
Note