Canon BJC 6100 User Guide - Page 31
Hold the new ink tank at a slight angle, align it with
View all Canon BJC 6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Replacing the Ink Tanks 3 Remove the new ink tank from its package. Pull the orange tape up and against the perforations to open the packing film. Important Remove the film carefully so you do not remove the label from the ink tank. The label is needed to match the ink tank with the correct slot of the BJ Cartridge. Label 4 Grip the bottom of the ink tank as shown in the figure and twist off the orange protective cap in the direction of the arrow Important • Never attempt to reattach a protective cap to an ink tank. Discard the protective cap according to the local laws and regulations regarding disposal of consumables. • To avoid interfering with the ink supply from a tank, do not touch an open ink port on the ink tank. 5 Hold the new ink tank at a slight angle, align it with the correct slot, then press down gently on top of the ink tank until it locks in place. Make sure that you insert the ink tank in the correct slot. The following figures show the correct array of ink tanks in the BJ Cartridges. Standard colour combination Black BJ Cartridge BC-30 Centre : BCI-3BK (Black) Color BJ Cartridge BC-31 Left : BCI-3C (Cyan) Centre : BCI-3M (Magenta) Right : BCI-3Y (Yellow) Ink Tank BCI-3BK Black Ink Tank Ink Tank Ink Tank BCI-3C BCI-3M BCI-3Y Cyan Magenta Yellow 31