Canon EOS Rebel T1i EOS REBEL T1i/EOS 500D Instruction Manual - Page 71

3 Setting the Image-recording Quality FAQ I want to select the quality matching the paper size for printing. Paper size A3 (42x29.7cm/16.5x11.7in.) 73 A4 (29.7x21cm/ 83 11.7x8.3in.) 74 1 1+73 76 84 86 Refer to the diagram on the left when choosing the image-recording quality. If you want to crop the image, selecting a higher quality (more pixels) such as 73, 83, 1, or 1+73 is recommended. 17.8x12.7cm/7.0x5.0in. 14.8x10cm/5.8x3.9in. What's the difference between 7 and 8? It indicates a different image quality due to a different compression rate. Even with the same number of pixels, the 7 image has higher image quality. If 8 is selected, the image quality will be slightly lower, but more images can be saved to the card. I took more shots than the number of possible shots indicated. Depending on the shooting conditions, you may be able to take more shots than was indicated. Or, it might be fewer than indicated. The possible shots displayed is only an estimate. Does the camera display the maximum burst? The maximum burst is displayed in the viewfinder's right side. Since it is only a single-digit indicator 0 - 9, any number higher than 9 will be displayed only as "9." Note that this number will also be displayed even when no card is installed in the camera. Be careful not to shoot without a card in the camera. When do I use the 1 mode? 1 images require processing with your computer. For details, see "About 1" and "About 1+73" on the next page. Other than 1, the images will be in the JPEG type commonly used in digital cameras. 71